https://qa.mandrakesoft.com/show_bug.cgi?id=1627
------- Additional Comments From [EMAIL PROTECTED] 2003-02-14 07:15 -------
I also have this problem using DrakeConnect with 2 ethernet cards
1: eth0, Lite-On,LC82C115 PNIC-II, tulip, roaring penguin pppoe
2: eth1, D-Link, DFE 538 TX, 8139too, LAN to windows box
I solved the problem by configuring each card individually making the eth0 card
use automatic IP addressing and the eth1 card use static IP. I used the
adsl-config script provided by roaring penguin and configured the PPPoE link
to start automatically at startup. Everything works gret now.
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
I have two ethernet PCI adaptors. Both are ne2000 compatibles.
eth0 is a 10 Mb/s connected to Internet via University LAN and it works fine.
eth1 is a 10/100 Mb/s is for a connection with a second PC in my office for
Internet sharing.
It cannot be set up at boot. Here is the message :
SIOCGIFFLAGS no such device
failed to bring up eth1
However, by running Drakconnect I am able to set up eth1 card and it runs
well. I can ping my other PC. Both eth0 and eth1 are managed by n2kpci module.
Here are lspci and lspcidrake report plus dmesg showing the effect of
Drakconnect at the end.
gpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge
unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge
unknown : Intel Corporation|82371AB PIIX4 ISA
unknown : Intel Corporation|82371AB PIIX4 IDE
usb-uhci : Intel Corporation|82371AB PIIX4 USB
sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE
Controller
es1371 : Ensoniq|ES1371 [AudioPCI-97]
ne2k-pci : Realtek|RTL-8029(AS)
8139too : Realtek|RTL-8139
Card:ATI Rage 128: ATI|Rage 128 VR AGP 1x/2x
unknown : Virtual|Hub []
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev
03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
03)
00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C
(rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RL/VR AGP
Linux version 2.4.21pre3-2mdk ([EMAIL PROTECTED]) (gcc version
3.2.1 (Mandrake Linux 9.1 3.2.1-2mdk)) #1 Thu Jan 23 23:18:06 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5a60
ACPI: RSDT (v001 ASUS P3B_F 12336.12337) @ 0x0fffc000
ACPI: FADT (v001 ASUS P3B_F 12336.12337) @ 0x0fffc080
ACPI: BOOT (v001 ASUS P3B_F 12336.12337) @ 0x0fffc040
ACPI: DSDT (v001 ASUS P3B_F 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
hdd=ide-scsi quiet
ide_setup: hdd=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 451.026 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 256484k/262128k available (1330k kernel code, 5256k reserved, 512k
data, 144k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 451.0417 MHz.
..... host bus clock speed is 100.2313 MHz.
cpu: 0, clocks: 1002313, slice: 501156
CPU0<T0:1002304,T1:501136,D:12,S:501156,C:1002313>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021212
PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1
PCI: Using configuration type 1
ACPI-0263: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI: Probing PCI hardware
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xe0000000, mapped to 0xd080a000, size 32768k
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: protected mode interface info at c000:4a0b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS40.0, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-M1302, ATAPI CD/DVD-ROM drive
blk: queue c0325100, I/O limit 4095Mb (mask 0xffffffff)
hdc: QUANTUM FIREBALL ST4.3A, ATA DISK drive
hdd: YAMAHA CRW4416E, ATAPI CD/DVD-ROM drive
blk: queue c032554c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=4866/255/63, UDMA(33)
hdc: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
hdc: 8418816 sectors (4310 MB) w/81KiB Cache, CHS=14848/9/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
/dev/ide/host0/bus1/target0/lun0:<6> [PTBL] [524/255/63] p1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 112k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 23:52:44 Jan 23 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
ide: no cache flush required.
ide: no cache flush required.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Adding Swap: 248968k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-M1302 Rev: 1006
Type: CD-ROM ANSI SCSI revision: 02
Vendor: YAMAHA Model: CRW4416E Rev: 1.0h
Type: CD-ROM ANSI SCSI revision: 02
ide: no cache flush required.
ide: no cache flush required.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xa800, IRQ 10, 00:00:1C:08:D9:76.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
es1371: version v0.32 time 23:48:33 Jan 23 2003
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xb000 irq 5
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A)
inserting floppy driver for 2.4.21pre3-2mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Legacy device
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe4000000
[drm] AGP 0.99 aperture @ 0xe4000000 64MB
[drm] Initialized r128 2.3.0 20021029 on minor 0
Splash status on console 0 changed to off
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 Fast Ethernet at 0xd28fa000, 00:50:fc:96:18:90, IRQ 9
eth1: Identified 8139 chip type 'RTL-8139C'
eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability
41e1.
eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability
41e1.
ide: no cache flush required.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
Regards,
Bernard
