You can use the command: (set-hardware-stereo-angle-factor -1)
to invert the image too. I shall make some buttons for this (and the Zalman stereo too). Additionally I am thinking of querying the window position and size to automatically set this. Not sure when I'll get to this though (other issues more burning currently)... B > ;; These should be even numbers to keep the stereo > ;; the right way around > (set-graphics-window-position 0 0) > (set-graphics-window-size 1680 1050) > > In general, if the image is inverted, just move the window up or > down 1 > pixel. > > > > On Thu, August 6, 2009 8:04 am, James Partridge wrote: > > Has anyone noticed that the 3D image in coot is inverted? Things > that are > > in the front on > > the mono image are switched to the back in the Zalman mode image. > > PyMOL has an option to flip the polarization of the image. Is > there a > > similar command for > > coot? Or is there a monitor setting that anyone has figured out? > > > > Thanks > > James > > > > > > William G. Scott > > Contact info: > http://chemistry.ucsc.edu/~wgscott/ >
