Quoting [EMAIL PROTECTED]: > Quoting [EMAIL PROTECTED]: > >> Quoting Corey Osgood <[EMAIL PROTECTED]>: >> >>> On Jan 30, 2008 9:50 AM, <[EMAIL PROTECTED]> wrote: >>> >>>> Hello, >>>> I am racking my brains with this. No matter what I do I can't seem to >>>> get the nic working. The nic is onboard the i82801DB southbridge down >>>> from the PCI bridge, so my Config.lb looks something like this: >>>> >>>> device pci 1e.0 on # PCI bridge: Intel Corporation 82801 PCI Bridge >>>> chip drivers/pci/onboard >>>> device pci 08.0 on end # Intel Corporation 82801DB PRO/100 VE Ethernet >>>> Controller >>>> end >>>> end >>> >> lspci -t >> +-1e.0-[0000:01]----08.0 >> >>> >>> >>>> But no matter what I try coreboot thinks it is a static device and >>>> disables it. >>>> >>>> do_pci_scan_bridge for PCI: 00:1e.0 >>>> PCI: pci_scan_bus for bus 01 >>>> Disabling static device: PCI: 01:08.0 >>>> > Well, I think I may have figured this out??? > When comparing the coreboot to original bios PCI Bridge 00:1e.0 > registers, it seems if the LAN controller wants use of the PCI bus it > needs to request it. Kind of funny:-) > With coreboot register 0x82 (PCI_MAST_STS?PCI Master Status Register) > is defaulted to 0x00. The original bios has bit 6 set (0x40), which is > "The ICH4?s internal LAN controller has requested use of the PCI bus." > So if I set this bit, coreboot should find the device when scanning the > bus, correct? > > I will try it out later tonight and report back. > Nope no luck:-((((
Thanks - Joe -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
