On 09.09.2008 03:53, Corey Osgood wrote: > On Mon, Sep 8, 2008 at 9:48 PM, Joseph Smith <[EMAIL PROTECTED]> wrote: > >> >> On Tue, 09 Sep 2008 03:31:00 +0200, Carl-Daniel Hailfinger >> <[EMAIL PROTECTED]> wrote: >> >>> I wanted to know which physical port of my multiple USB controllers have >>> the debug capability. There was no way to find that easily, so I created >>> a tool which will do most of the work for the user. >>> >>> Example output: >>> The following PCI devices support a USB debug port (says lspci): >>> 0000:00:1d.7 >>> The following PCI devices support a USB debug port (says the kernel): >>> 0000:00:1d.7 >>> PCI device 0000:00:1d.7, USB bus 3, USB physical port 1 >>> Currently connected high-speed devices: >>> /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M >>> |__ Port 2: Dev 20, If 0, Class=stor., Driver=usb-storage, 480M >>> >>> The output can be improved, but it's a good start. >>> >>> >> Doesn't lspci -vvv tell you? It does for me on the ICH4 >> >> 00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI >> Controller (rev 02) (prog-if 20 [EHCI]) >> Subsystem: Unknown device bc8a:4610 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- >> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- >> Latency: 0 >> Interrupt: pin D routed to IRQ 11 >> Region 0: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA >> PME(D0+,D1-,D2-,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [58] Debug port >> > > But IIRC, only the first port on the controller works as a debug port, > and Carl-Daniel's program will let you figure out exactly which port > that is, by swapping a USB device between the two ports. Right? >
Yes. However, that "first port" limitation does not exist, so you need to retrieve the number of the debug port. And for multiple USB controllers locating the right physical port is downright exhausting. I'd be interested in the output of my script on your machines and whether it helped you find the right physical port. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
