On Thu, Oct 2, 2008 at 1:58 PM, Myles Watson <[EMAIL PROTECTED]> wrote: > I can't get v3 for simnow to work with coreinfo as the payload. I get no > VGA even if I enable it, VGA is never mentioned in the boot log, and it ends > with a triple fault: > > cisc-cpu.cpp: CProcessor::GenerateException(): shutdown due to triple fault > > Fatal error reached, stopping simulation. Error message(s) follow: > > cisc-cpu.cpp: CProcessor::GenerateException(): shutdown due to triple fault > > NOTE: Simulation cannot be restarted until a reset is asserted. > Simulation state CAN be inspected with the SimNow debugger. > > -- end triple fault -- > > This error shows up in the boot log for simnow 4.4.4pub: > k8_domain_scan_bus > pci_scan_bus start bus 0x0000ce2c, bus->dev 0x0000cbe0 > ERROR: pci_scan_bus called with incorrect bus->dev->path.type, path is > PCI_DOMAIN: 0000 > PCI: pci_scan_bus for bus 00 > pci_scan_bus: old_devices 0x0000cee0, dev for this bus 0x0000cbe0 (domain_0) > PCI: scan devfn 0xc0 to 0xff >
I'll try it again tonight. > It also shows up now in QEMU (it didn't use to.) > pci_domain_scan_bus: calling pci_scan_bus > pci_scan_bus start bus 0x0000ac0c, bus->dev 0x0000a9c0 > ERROR: pci_scan_bus called with incorrect bus->dev->path.type, path is > PCI_DOMAIN: 0000 > PCI: pci_scan_bus for bus 00 > > This "Not a multi function device" message is new to QEMU too. > PCI: 00:00.0 [PCI: 8086:1237] enabled > PCI: pci_scan_bus pci_probe_dev returns dev 0x0000b918(dynamic PCI: 00:00.0) > Not a multi function device, or the device is not present. Skip to next it's just noise. I am glad to see you looking at simnow. Keep me posted and I will do what I can to help. We need more testers (we only have one :-) ron -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot