On Fri, Oct 10, 2008 at 12:46 AM, Corey Osgood <[EMAIL PROTECTED]>wrote:
> On Thu, Oct 9, 2008 at 9:57 PM, Corey Osgood <[EMAIL PROTECTED]>wrote: > >> On Thu, Oct 9, 2008 at 7:56 PM, ron minnich <[EMAIL PROTECTED]> wrote: >> >>> exciting! I am looking forward to this one! >> >> >> >> Problems already: >> >> [EMAIL PROTECTED]:~/coreboot/coreboot-v3$ make >> CP build/config.h >> GEN build/build.h >> CC build/mainboard/jetway/j7f2/stage1.o >> DTC build/statictree.h >> DTC mainboard/jetway/j7f2/dts (dts->lbh) >> CC build/superio/fintek/f71805f/stage1.o >> CC build/arch/x86/via/stage0.o >> AS build/arch/x86/via/stage0.o >> /home/corey/coreboot/coreboot-v3/arch/x86/via/stage0.S: Assembler >> messages: >> /home/corey/coreboot/coreboot-v3/arch/x86/via/stage0.S:37: Error: can't >> handle non absolute segment in `ljmp' >> > > No progress on this. Makes no sense to me, geode and i586 car use the same > piece of asm without complaint > Sorry for the mailbox flooding, I'm slowly learning to step back and look at things before jumping to conclusions. Geode and i586 also have ROM_CODE_SEG defined, this didn't, that's why the jump was going to nowhere. Do those defines belong in this file, somewhere else, or in Kconfig? Are the i586 values the same as they should be for c7? I'm now getting hung up because XIP_ROM_[SIZE,BASE] isn't defined. Do we still need XIP and those defines? Are the value limitations the same as they were in v2? Thanks, Corey
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
