AFAIK, flashrom is broken for most ICHx. -Corey
On Thu, Oct 30, 2008 at 9:57 AM, <[EMAIL PROTECTED]> wrote: > here is the output you've requested : > > <INFO BEGIN> > Calibrating delay loop... 366M loops per second, 100 myus = 350 us. OK. > No coreboot table found. > Found chipset "Intel ICH", enabling flash write... > BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 > OK. > Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81 > Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81 > Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI > controller > Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xda, id2 0x32 > Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xda, id2 0x32 > Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81 > Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 > 0x2d > Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x81 > Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x81 > Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0xda, id2 0x32 > Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x81 > Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x81 > Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xff, id2 0xff, id1 > parity violation > Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x81 > Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x81 > Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff > Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff > Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P20, 256 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P40, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P80, 1024 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P16, 2048 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P32, 4096 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P64, 8192 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M25P128, 16384 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81 > Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d > Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32 > Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32 > Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32 > Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32 > Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff > Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x81 > Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x81 > Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 > parity violation > Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, > id1 parity violation > Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1 > parity violation > Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W29EE011, 128 KB: > === > Probing disabled for Winbond W29EE011 because the probing sequence puts the > AMIC A49LF040A in a funky state. > Use 'flashrom -c W29EE011' if you have a board with this chip. > === > Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xda, id2 0x32 > Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x25, id2 0x81 > Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xda, did > 0x32 > Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid > 0xda, did 0x32 > Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, > but no SPI chipset/strapping detected > Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI > chipset/strapping detected > Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI > chipset/strapping detected > No EEPROM/flash device found. > If you know which flash chip you have, and if this version of flashrom > supports a similar flash chip, you can try to force read your chip. Run: > flashrom -f -r -c similar_supported_flash_chip filename > > Note: flashrom can never write when the flash chip isn't found > automatically. > <INFO END> > > > Blessings, > Elia Yehuda. > > > On Oct 30, 2008 2:30pm, Carl-Daniel Hailfinger < > [EMAIL PROTECTED]> wrote: > > Hi Elia, > > > > > > > > On 30.10.2008 11:45, Elia Yehuda wrote: > > > > > I'm trying to play with coreboot to flash my bios on my PC, with no > success. > > > > > here are the computer hardware information followed by the commands I'm > > > > > trying to execute. > > > > > > > > > > cpu: Socket370 Intel Pentium III Celeron > > > > > northbridge: Intel 82810E > > > > > southbridge: Intel 8281AA > > > > > mainboard: 810 R 4.1 with lan > > > > > super i/o: Winbond W8362F-AW > > > > > bios device: ST M50FW002 > > > > > > > > > > lspci output: > > > > > [...] > > > > > > > > > > $ flashrom -f -r -c M50FW016 mydump > > > > > Calibrating delay loop... OK. > > > > > No coreboot table found. > > > > > Found chipset "Intel ICH", enabling flash write... OK. > > > > > No EEPROM/flash device found. > > > > > Force read (-f -r -c) requested, forcing chip probe success: > > > > > Found chip "ST M50FW016" (2048 KB) at physical address 0xffe00000. > > > > > Force reading flash...done > > > > > > > > > > > > > It is a bad sign if you had to force the chip type for the read > operation. > > > > > > > > > $ flashrom -f -w -c M50FW016 mydump > > > > > Calibrating delay loop... OK. > > > > > No coreboot table found. > > > > > Found chipset "Intel ICH", enabling flash write... OK. > > > > > No EEPROM/flash device found. > > > > > > > > > > > > > Force write can't work because the strategy for access is unknown. > > > > > > > > > I'd appreciate any assistance as all this flashing stuff is new to me. > > > > > Basically what i'm trying to accomplish is having my linux system > running as > > > > > the payload, but i'm stuck with even re-writing the same bios-dump i've > just > > > > > read from the bios... I'll post any further information required to > diagnose > > > > > this further. > > > > > > > > > > > > > Can you run > > > > flashrom -V > > > > and report the results to this list? > > > > > > > > We may need to change the chipset/board enable sequence for your board. > > > > > > > > Regards, > > > > Carl-Daniel > > > > > > > > -- > > > > http://www.hailfinger.org/ > > > > > > > > -- > coreboot mailing list: coreboot@coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot