Hi all, my Asus M2A-VM (690G/SB600) is working and boots to memtest and FILO.
Memtest works fine over serial (well, I only ran memtest until it reached 15%). FILO can load the kernel, but I didn't have time to enable serial output for my kernel. Thanks to Zheng Bao for adding support for my 690G graphics. I'll post a patch soon. Right now, there are a few more bugs to fix. The ncHT fixup is already known, a clean patch will come tomorrow. On a first boot, I get an endless loop of drive detection fail,trying... until I press the reset button. After that, it boots fine. That message is in the SB600 code. I will enable some debugging that was disabled in revision 3785. Another curiosity is that my power button has become ineffective. It simply initiates a reboot instead of switching off the machine after 4 seconds. That happens only with the FILO payload. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot