The onboard was not removed because all my work have based on 4924, which has remove the onboard. If I need try the new code, I will remove it.
Zheng -----Original Message----- From: coreboot-boun...@coreboot.org [mailto:coreboot-boun...@coreboot.org] On Behalf Of Peter Stuge Sent: Wednesday, November 11, 2009 11:33 AM To: coreboot@coreboot.org Subject: Re: [coreboot] [v2] r4925 makes my linux hang Config.lb_mahogany_k8 > chip southbridge/amd/rs780 > device pci 0.0 on end # HT 0x9600 > device pci 1.0 on # Internal Graphics P2P bridge 0x9602 > chip drivers/pci/onboard > device pci 5.0 on end # Internal Graphics 0x9615 > register "rom_address" = "0xfff00000" > end > end I think onboard was removed, and also rom_address because CBFS can be used to find the ROM. I'm not sure how to best "decouple" the graphics device from the 780. //Peter -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot