These devices used to be enabled. I just disabled when the internal gfx hanged. I tried again with those enabled, the log is not much different except the message printed in rs780_gfx_init.
Zheng -----Original Message----- From: Myles Watson [mailto:myle...@gmail.com] Sent: Wednesday, November 25, 2009 12:10 AM To: Bao, Zheng Cc: 'coreboot' Subject: RE: [coreboot] [v2] r4925 makes my linux hang Zheng, >From the K8 log: PCI: 00:02.0: enabled 0, 0 resources PCI: 00:03.0: enabled 0, 0 resources These devices are enabled for fam10, but disabled for the K8 board. I thought the only difference was supposed to be the processor/northbridge. Because of that, rs780_gfx_init doesn't get run. UMA is also different. I'm not sure what's actually breaking it, but it would be easier to tell if you minimize some of those differences. Thanks, Myles -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
