Author: stepan
Date: Wed Mar 31 00:12:59 2010
New Revision: 5338
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5338

Log:
drop USE_INIT should be USE_PRINTK_IN_CAR here.
uint32_t should be u32
DEBUG_RAM_SETUP was failing on some northbridges
Signed-off-by: Stefan Reinauer <ste...@coresystems.de>
Acked-by: Stefan Reinauer <ste...@coresystems.de>

Modified:
   trunk/src/northbridge/intel/e7501/debug.c
   trunk/src/northbridge/intel/i440bx/raminit.c
   trunk/src/northbridge/intel/i82810/northbridge.c
   trunk/src/northbridge/intel/i82810/raminit.c
   trunk/src/northbridge/intel/i82830/raminit.c

Modified: trunk/src/northbridge/intel/e7501/debug.c
==============================================================================
--- trunk/src/northbridge/intel/e7501/debug.c   Wed Mar 31 00:08:48 2010        
(r5337)
+++ trunk/src/northbridge/intel/e7501/debug.c   Wed Mar 31 00:12:59 2010        
(r5338)
@@ -39,7 +39,7 @@
        for(i = 0; i < 256; i++) {
                unsigned char val;
                if ((i & 0x0f) == 0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                         printk(BIOS_DEBUG, "\r\n%02x:",i);
 #else
                        print_debug("\r\n");
@@ -48,7 +48,7 @@
 #endif
                }
                val = pci_read_config8(dev, i);
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                printk(BIOS_DEBUG, " %02x", val);
 #else
                print_debug_char(' ');
@@ -101,7 +101,7 @@
                device = ctrl->channel0[i];
                if (device) {
                        int j;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                        printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device);
 #else
                        print_debug("dimm: "); 
@@ -113,7 +113,7 @@
                                int status;
                                unsigned char byte;
                                if ((j & 0xf) == 0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                                        printk(BIOS_DEBUG, "\r\n%02x: ", j);
 #else
                                        print_debug("\r\n");
@@ -126,7 +126,7 @@
                                        break;
                                }
                                byte = status & 0xff;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                                printk(BIOS_DEBUG, "%02x ", byte);
 #else
                                print_debug_hex8(byte);
@@ -138,7 +138,7 @@
                device = ctrl->channel1[i];
                if (device) {
                        int j;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                         printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device);
 #else`
                        print_debug("dimm: "); 
@@ -150,7 +150,7 @@
                                int status;
                                unsigned char byte;
                                if ((j & 0xf) == 0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                                         printk(BIOS_DEBUG, "\r\n%02x: ", j);
 #else
                                        print_debug("\r\n");
@@ -163,7 +163,7 @@
                                        break;
                                }
                                byte = status & 0xff;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                                 printk(BIOS_DEBUG, "%02x ", byte);
 #else
                                print_debug_hex8(byte);
@@ -181,7 +181,7 @@
         for(device = 1; device < 0x80; device++) {
                 int j;
                if( smbus_read_byte(device, 0) < 0 ) continue;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                printk(BIOS_DEBUG, "smbus: %02x", device);
 #else
                 print_debug("smbus: ");
@@ -195,7 +195,7 @@
                                break;
                         }
                         if ((j & 0xf) == 0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                                printk(BIOS_DEBUG, "\r\n%02x: ",j);
 #else
                                print_debug("\r\n");
@@ -204,7 +204,7 @@
 #endif
                         }
                         byte = status & 0xff;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                         printk(BIOS_DEBUG, "%02x ", byte);
 #else
                         print_debug_hex8(byte);
@@ -219,7 +219,7 @@
 {
 
        int i;
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
        printk(BIOS_DEBUG, "%04x:\r\n", port);
 #else
         print_debug_hex16(port);
@@ -228,7 +228,7 @@
         for(i=0;i<256;i++) {
                 uint8_t val;
                 if ((i & 0x0f) == 0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                        printk(BIOS_DEBUG, "%02x:", i);
 #else
                         print_debug_hex8(i);
@@ -236,7 +236,7 @@
 #endif
                 }
                 val = inb(port);
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                printk(BIOS_DEBUG, " %02x",val);
 #else
                 print_debug_char(' ');
@@ -255,7 +255,7 @@
        print_debug("dump_mem:");
         for(i=start;i<end;i++) {
                if((i & 0xf)==0) {
-#if CONFIG_USE_INIT
+#if CONFIG_USE_PRINTK_IN_CAR
                        printk(BIOS_DEBUG, "\r\n%08x:", i);
 #else  
                        print_debug("\r\n");
@@ -263,7 +263,7 @@
                        print_debug(":");
 #endif
                }
-#if CONFIG_USE_INIT    
+#if CONFIG_USE_PRINTK_IN_CAR   
                printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char 
*)i));
 #else
                print_debug(" ");

Modified: trunk/src/northbridge/intel/i440bx/raminit.c
==============================================================================
--- trunk/src/northbridge/intel/i440bx/raminit.c        Wed Mar 31 00:08:48 
2010        (r5337)
+++ trunk/src/northbridge/intel/i440bx/raminit.c        Wed Mar 31 00:12:59 
2010        (r5338)
@@ -36,7 +36,9 @@
 #define PRINT_DEBUG_HEX8(x)    print_debug_hex8(x)
 #define PRINT_DEBUG_HEX16(x)   print_debug_hex16(x)
 #define PRINT_DEBUG_HEX32(x)   print_debug_hex32(x)
-#define DUMPNORTH()            dump_pci_device(PCI_DEV(0, 0, 0))
+// no dump_pci_device in src/northbridge/intel/i440bx
+// #define DUMPNORTH()         dump_pci_device(PCI_DEV(0, 0, 0))
+#define DUMPNORTH()
 #else
 #define PRINT_DEBUG(x)
 #define PRINT_DEBUG_HEX8(x)
@@ -834,7 +836,7 @@
                                die("HALT\r\n");
                        }
                        if ((sz.side1 > 128)) {
-                               print_err ("DIMMs > 128MB per side\r\n"
+                               print_err("DIMMs > 128MB per side\r\n"
                                           "are not supported on this NB\r\n");
                                die("HALT\r\n");
                        }

Modified: trunk/src/northbridge/intel/i82810/northbridge.c
==============================================================================
--- trunk/src/northbridge/intel/i82810/northbridge.c    Wed Mar 31 00:08:48 
2010        (r5337)
+++ trunk/src/northbridge/intel/i82810/northbridge.c    Wed Mar 31 00:12:59 
2010        (r5338)
@@ -208,8 +208,6 @@
 
 static void enable_dev(struct device *dev)
 {
-       struct device_path path;
-
        /* Set the operations if it is a special bus type */
        if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
                dev->ops = &pci_domain_ops;

Modified: trunk/src/northbridge/intel/i82810/raminit.c
==============================================================================
--- trunk/src/northbridge/intel/i82810/raminit.c        Wed Mar 31 00:08:48 
2010        (r5337)
+++ trunk/src/northbridge/intel/i82810/raminit.c        Wed Mar 31 00:12:59 
2010        (r5338)
@@ -30,12 +30,17 @@
 -----------------------------------------------------------------------------*/
 
 /* Debugging macros. */
+#define HAVE_ENOUGH_REGISTERS   0 /* Don't have enough registers to compile all
+                                  * debugging code with ROMCC
+                                  */
 #if CONFIG_DEBUG_RAM_SETUP
 #define PRINT_DEBUG(x)         print_debug(x)
 #define PRINT_DEBUG_HEX8(x)    print_debug_hex8(x)
 #define PRINT_DEBUG_HEX16(x)   print_debug_hex16(x)
 #define PRINT_DEBUG_HEX32(x)   print_debug_hex32(x)
-#define DUMPNORTH()            dump_pci_device(PCI_DEV(0, 0, 0))
+// no dump_pci_device in src/northbridge/intel/i82810/
+// #define DUMPNORTH()         dump_pci_device(PCI_DEV(0, 0, 0))
+#define DUMPNORTH()
 #else
 #define PRINT_DEBUG(x)
 #define PRINT_DEBUG_HEX8(x)
@@ -138,26 +143,29 @@
                drp = (drp >> (i * 4)) & 0x0f;
 
                dimm_size = translate_i82810_to_mb[drp];
-               addr = (dimm_start * 1024 * 1024) + addr_offset;
                if (dimm_size) {
+                       addr = (dimm_start * 1024 * 1024) + addr_offset;
+#if HAVE_ENOUGH_REGISTERS
                        PRINT_DEBUG("    Sending RAM command 0x");
                        PRINT_DEBUG_HEX8(reg8);
                        PRINT_DEBUG(" to 0x");
                        PRINT_DEBUG_HEX32(addr);
                        PRINT_DEBUG("\r\n");
+#endif
 
                        read32(addr);
                }
 
                dimm_bank = translate_i82810_to_bank[drp];
-               addr = ((dimm_start + dimm_bank) * 1024 * 1024) + addr_offset;
                if (dimm_bank) {
+                       addr = ((dimm_start + dimm_bank) * 1024 * 1024) + 
addr_offset;
+#if HAVE_ENOUGH_REGISTERS
                        PRINT_DEBUG("    Sending RAM command 0x");
                        PRINT_DEBUG_HEX8(reg8);
                        PRINT_DEBUG(" to 0x");
                        PRINT_DEBUG_HEX32(addr);
                        PRINT_DEBUG("\r\n");
-
+#endif
                        read32(addr);
                }
 

Modified: trunk/src/northbridge/intel/i82830/raminit.c
==============================================================================
--- trunk/src/northbridge/intel/i82830/raminit.c        Wed Mar 31 00:08:48 
2010        (r5337)
+++ trunk/src/northbridge/intel/i82830/raminit.c        Wed Mar 31 00:12:59 
2010        (r5338)
@@ -67,9 +67,9 @@
 DIMM-initialization functions.
 -----------------------------------------------------------------------------*/
 
-static void do_ram_command(uint32_t command)
+static void do_ram_command(u32 command)
 {
-       uint32_t reg32;
+       u32 reg32;
 
        /* Configure the RAM command. */
        reg32 = pci_read_config32(NORTHBRIDGE, DRC);
@@ -82,7 +82,7 @@
        PRINT_DEBUG("\r\n");
 }
 
-static void ram_read32(uint8_t dimm_start, uint32_t offset)
+static void ram_read32(u8 dimm_start, u32 offset)
 {
        if (offset == 0x55aa55aa) {
                PRINT_DEBUG("  Reading RAM at 0x");
@@ -114,7 +114,7 @@
 static void initialize_dimm_rows(void)
 {
        int i, row;
-       uint8_t dimm_start, dimm_end;
+       u8 dimm_start, dimm_end;
        unsigned device;
 
        dimm_start = 0;
@@ -487,7 +487,7 @@
 
 static void northbridge_set_registers(void)
 {
-       uint16_t value;
+       u16 value;
        int igd_memory = 0;
 
        PRINT_DEBUG("Setting initial nothbridge registers....\r\n");
@@ -542,7 +542,7 @@
 static void sdram_initialize(void)
 {
        int i;
-       uint32_t reg32;
+       u32 reg32;
 
        /* Setup Initial SDRAM Registers */
        sdram_set_registers();

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to