Author: stepan
Date: Fri May 14 21:09:20 2010
New Revision: 5552
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5552

Log:
i945:
* fix some potential compiler issues with newer gccs
* add some more comments
* make 32bit accesses for feature test functions
* make some objects drivers because they contain a pci_driver struct.

Signed-off-by: Stefan Reinauer <ste...@coresystems.de>
Acked-by: Stefan Reinauer <ste...@coresystems.de>

Modified:
   trunk/src/mainboard/intel/d945gclf/Makefile.inc
   trunk/src/mainboard/kontron/986lcd-m/Makefile.inc
   trunk/src/mainboard/kontron/986lcd-m/cmos.layout
   trunk/src/mainboard/kontron/986lcd-m/fadt.c
   trunk/src/mainboard/kontron/986lcd-m/romstage.c
   trunk/src/mainboard/roda/rk886ex/Makefile.inc
   trunk/src/mainboard/roda/rk886ex/cmos.layout
   trunk/src/mainboard/roda/rk886ex/romstage.c
   trunk/src/northbridge/intel/i945/early_init.c
   trunk/src/northbridge/intel/i945/i945.h
   trunk/src/northbridge/intel/i945/raminit.c
   trunk/src/northbridge/intel/i945/udelay.c

Modified: trunk/src/mainboard/intel/d945gclf/Makefile.inc
==============================================================================
--- trunk/src/mainboard/intel/d945gclf/Makefile.inc     Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/intel/d945gclf/Makefile.inc     Fri May 14 21:09:20 
2010        (r5552)
@@ -17,6 +17,6 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 ##
 
-obj-y += rtl8168.o
+driver-y += rtl8168.o
 
 smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o

Modified: trunk/src/mainboard/kontron/986lcd-m/Makefile.inc
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/Makefile.inc   Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/kontron/986lcd-m/Makefile.inc   Fri May 14 21:09:20 
2010        (r5552)
@@ -17,6 +17,6 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 ##
 
-obj-y += rtl8168.o
+driver-y += rtl8168.o
 
 smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o

Modified: trunk/src/mainboard/kontron/986lcd-m/cmos.layout
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/cmos.layout    Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/kontron/986lcd-m/cmos.layout    Fri May 14 21:09:20 
2010        (r5552)
@@ -89,7 +89,8 @@
 
 # coreboot config options: bootloader
 416        512       s       0        boot_devices
-#928         40       r       0        unused
+928          8       h       0        boot_default
+#936         12       r       0        unused
 
 # coreboot config options: mainboard specific options
 948          2       e       8        cpufan_cruise_control

Modified: trunk/src/mainboard/kontron/986lcd-m/fadt.c
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/fadt.c Fri May 14 19:15:57 2010        
(r5551)
+++ trunk/src/mainboard/kontron/986lcd-m/fadt.c Fri May 14 21:09:20 2010        
(r5552)
@@ -89,16 +89,17 @@
 
        fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
                        ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+                       ACPI_FADT_RESET_REGISTER |
                        ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
 
-       fadt->reset_reg.space_id = 0;
-       fadt->reset_reg.bit_width = 0;
+       fadt->reset_reg.space_id = 1;
+       fadt->reset_reg.bit_width = 8;
        fadt->reset_reg.bit_offset = 0;
        fadt->reset_reg.resv = 0;
-       fadt->reset_reg.addrl = 0x0;
-       fadt->reset_reg.addrh = 0x0;
+       fadt->reset_reg.addrl = 0xcf9;
+       fadt->reset_reg.addrh = 0;
 
-       fadt->reset_value = 0;
+       fadt->reset_value = 6;
        fadt->x_firmware_ctl_l = (unsigned long)facs;
        fadt->x_firmware_ctl_h = 0;
        fadt->x_dsdt_l = (unsigned long)dsdt;

Modified: trunk/src/mainboard/kontron/986lcd-m/romstage.c
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/romstage.c     Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/kontron/986lcd-m/romstage.c     Fri May 14 21:09:20 
2010        (r5552)
@@ -367,6 +367,13 @@
        }
 
        ich7_enable_lpc();
+
+       /* Force PCIRST# */
+       pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
+       udelay(200);
+       pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
+       udelay(200);
+
        early_superio_config_w83627thg();
 
        /* Set up the console */
@@ -383,8 +390,9 @@
        report_bist_failure(bist);
 
        if (MCHBAR16(SSKPD) == 0xCAFE) {
-               printk(BIOS_DEBUG, "soft reset detected.\n");
-               boot_mode = 1;
+               printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
+               outb(0x6, 0xcf9);
+               while (1) asm("hlt");
        }
 
        /* Perform some early chipset initialization required

Modified: trunk/src/mainboard/roda/rk886ex/Makefile.inc
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/Makefile.inc       Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/roda/rk886ex/Makefile.inc       Fri May 14 21:09:20 
2010        (r5552)
@@ -19,6 +19,6 @@
 
 obj-y += m3885.o
 obj-y += ec.o
-obj-y += rtl8168.o
+driver-y += rtl8168.o
 
 smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o

Modified: trunk/src/mainboard/roda/rk886ex/cmos.layout
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/cmos.layout        Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/mainboard/roda/rk886ex/cmos.layout        Fri May 14 21:09:20 
2010        (r5552)
@@ -91,7 +91,8 @@
 
 # coreboot config options: bootloader
 416        512       s       0        boot_devices
-#928         80       r       0        unused
+928          8       h       0        boot_default
+#936         48       r       0        unused
 
 # coreboot config options: check sums
 984         16       h       0        check_sum

Modified: trunk/src/mainboard/roda/rk886ex/romstage.c
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/romstage.c Fri May 14 19:15:57 2010        
(r5551)
+++ trunk/src/mainboard/roda/rk886ex/romstage.c Fri May 14 21:09:20 2010        
(r5552)
@@ -281,6 +281,10 @@
        }
 
        ich7_enable_lpc();
+
+       /* Force PCIRST# */
+       pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
+
        early_superio_config();
 
        /* Set up the console */
@@ -297,8 +301,9 @@
        report_bist_failure(bist);
 
        if (MCHBAR16(SSKPD) == 0xCAFE) {
-               printk(BIOS_DEBUG, "soft reset detected.\n");
-               boot_mode = 1;
+               printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
+               outb(0x6, 0xcf9);
+               while (1) asm("hlt");
        }
 
        /* Perform some early chipset initialization required

Modified: trunk/src/northbridge/intel/i945/early_init.c
==============================================================================
--- trunk/src/northbridge/intel/i945/early_init.c       Fri May 14 19:15:57 
2010        (r5551)
+++ trunk/src/northbridge/intel/i945/early_init.c       Fri May 14 21:09:20 
2010        (r5552)
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2007-2010 coresystems GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -154,7 +154,7 @@
        printk(BIOS_DEBUG, " done.\n");
 
        printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
-       RCBA32(GCS) = (RCBA32(0x3410)) | (1 << 5);      /* No reset */
+       RCBA32(GCS) = RCBA32(GCS) | (1 << 5);   /* No reset */
        outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08);  /* halt timer */
        printk(BIOS_DEBUG, " done.\n");
 
@@ -344,8 +344,7 @@
 {
        u32 reg32;
        u32 timeout;
-
-       int activate_aspm = 1;
+       int activate_aspm = 1; /* hardcode ASPM for now */
 
        printk(BIOS_DEBUG, "Setting up DMI RCRB\n");
 
@@ -481,10 +480,12 @@
        else
                printk(BIOS_DEBUG, "ok\n");
 
+       /* Clear Error Status Bits! */
        DMIBAR32(0x1c4) = 0xffffffff;
        DMIBAR32(0x1d0) = 0xffffffff;
        DMIBAR32(0x228) = 0xffffffff;
 
+       /* Program Read-Only Write-Once Registers */
        DMIBAR32(0x308) = DMIBAR32(0x308);
        DMIBAR32(0x314) = DMIBAR32(0x314);
        DMIBAR32(0x324) = DMIBAR32(0x324);
@@ -500,7 +501,7 @@
                        reg32 |= (3 << 0);
                        DMIBAR32(0x224) = reg32;
                        outb(0x06, 0xcf9);
-                       for (;;) ;      /* wait for reset */
+                       for (;;) asm("hlt");    /* wait for reset */
                }
        }
 }
@@ -530,11 +531,11 @@
 
        /* First we reset the secondary bus */
        reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0x3e);
-       reg16 |= (1 << 6);
+       reg16 |= (1 << 6); /* SRESET */
        pci_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16);
        /* Read back and clear reset bit. */
        reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0x3e);
-       reg16 &= ~(1 << 6);
+       reg16 &= ~(1 << 6); /* SRESET */
        pci_write_config16(PCI_DEV(0, 0x01, 0), 0x3e, reg16);
 
        reg16 = pci_read_config16(PCI_DEV(0, 0x01, 0), 0xba);
@@ -625,9 +626,11 @@
        if (reg16 == 1) {
                reg32 |= 0x32b;
                // TODO
+               /* pcie_write_config32(PCI_DEV(0, 0x01, 0), 0x204, reg32); */
        } else if (reg16 == 16) {
                reg32 |= 0x0f4;
                // TODO
+               /* pcie_write_config32(PCI_DEV(0, 0x01, 0), 0x204, reg32); */
        }
 
        reg32 = (pci_read_config32(PCI_DEV(0xa, 0, 0), 0x8) >> 8);
@@ -745,8 +748,8 @@
        if (i945_silicon_revision() <= 2 ) {
                /* Set voltage specific parameters */
                reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0xe80);
-               reg32 &= (0xf << 4);
-               if ((MCHBAR32(0xe08) & (1 << 20)) == 0) {
+               reg32 &= (0xf << 4);    /* Default case 1.05V */
+               if ((MCHBAR32(0xe08) & (1 << 20)) == 0) {       /* 1.50V */
                        reg32 |= (7 << 4);
                }
                pcie_write_config32(PCI_DEV(0, 0x01, 0), 0xe80, reg32);
@@ -843,7 +846,12 @@
 {
        RCBA32(CG) |= (1 << 0);
 
+       /* Initialize slot power limit for root ports */
        pci_write_config32(PCI_DEV(0, 0x1c, 0), 0x54, 0x00000060);
+#if 0
+       pci_write_config32(PCI_DEV(0, 0x1c, 4), 0x54, 0x00480ce0);
+       pci_write_config32(PCI_DEV(0, 0x1c, 5), 0x54, 0x00500ce0);
+#endif
 
        pci_write_config32(PCI_DEV(0, 0x1c, 0), 0xd8, 0x00110000);
 }
@@ -852,11 +860,11 @@
 {
        /* Print some chipset specific information */
        switch (pci_read_config32(PCI_DEV(0, 0x00, 0), 0)) {
-       case 0x27708086:
+       case 0x27708086: /* 82945G/GZ/GC/P/PL */
                i945_detect_chipset();
                break;
-       case 0x27a08086:
-       case 0x27ac8086:
+       case 0x27a08086: /* 945GME/GSE */
+       case 0x27ac8086: /* 945GM/PM/GMS/GU/GT, 943/940GML */
                i945m_detect_chipset();
                break;
        }

Modified: trunk/src/northbridge/intel/i945/i945.h
==============================================================================
--- trunk/src/northbridge/intel/i945/i945.h     Fri May 14 19:15:57 2010        
(r5551)
+++ trunk/src/northbridge/intel/i945/i945.h     Fri May 14 21:09:20 2010        
(r5552)
@@ -331,5 +331,7 @@
 
 #define DMIDRCCFG      0xeb4   /* 32bit */
 
+static inline void barrier(void) { asm("" ::: "memory"); }
+
 #endif
 #endif

Modified: trunk/src/northbridge/intel/i945/raminit.c
==============================================================================
--- trunk/src/northbridge/intel/i945/raminit.c  Fri May 14 19:15:57 2010        
(r5551)
+++ trunk/src/northbridge/intel/i945/raminit.c  Fri May 14 21:09:20 2010        
(r5552)
@@ -132,7 +132,7 @@
        return MAXIMUM_SUPPORTED_FREQUENCY;
 #endif
 
-       reg32 = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4);
+       reg32 = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4); /* CAPID0 + 4 */
        reg32 &= (7 << 0);
 
        switch (reg32) {
@@ -156,7 +156,7 @@
 {
        u32 reg32;
 
-       reg32 = pci_read_config8(PCI_DEV(0, 0x00,0), 0xe4);
+       reg32 = pci_read_config32(PCI_DEV(0, 0x00,0), 0xe4); /* CAPID0 + 4 */
        reg32 >>= 25;
        reg32 &= 1;
 
@@ -172,7 +172,7 @@
 {
        u32 reg32;
 
-       reg32 = pci_read_config8(PCI_DEV(0, 0x00,0), 0xe4);
+       reg32 = pci_read_config32(PCI_DEV(0, 0x00,0), 0xe4); /* CAPID0 + 4 */
        reg32 >>= 24;
        reg32 &= 1;
 
@@ -205,7 +205,7 @@
 {
        u8 reg8;
 
-       reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe5);
+       reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe5); /* CAPID0 + 5 */
        reg8 &= (1 << 0);
 
        return (reg8 != 0);
@@ -228,7 +228,7 @@
        return (reg8);
 }
 
-static void sdram_detect_errors(void)
+static void sdram_detect_errors(struct sys_info *sysinfo)
 {
        u8 reg8;
        u8 do_reset = 0;
@@ -269,6 +269,29 @@
        reg8 |= (1<<7);
        pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8);
 
+       /* clear self refresh if not wake-up from suspend */
+       if (sysinfo->boot_path != 2) {
+               MCHBAR8(0xf14) |= 3;
+       } else {
+               /* Validate self refresh config */
+               if (((sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED) ||
+                    (sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED)) &&
+                   !(MCHBAR8(0xf14) & (1<<0))) {
+                       do_reset = 1;
+               }
+               if (((sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED) ||
+                    (sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED)) &&
+                   !(MCHBAR8(0xf14) & (1<<1))) {
+                       do_reset = 1;
+               }
+       }
+
+       if (do_reset) {
+               printk(BIOS_DEBUG, "Reset required.\n");
+               outb(0x00, 0xcf9);
+               outb(0x0e, 0xcf9);
+               for (;;) asm("hlt"); /* Wait for reset! */
+       }
 }
 
 /**
@@ -1311,7 +1334,7 @@
        reg32 |= (1 << 6) | (1 << 4);
        MCHBAR32(DRTST) = reg32;
 
-       asm volatile ("nop; nop;");
+       asm volatile ("nop; nop;" ::: "memory");
 
        reg32 = MCHBAR32(DRTST);
 
@@ -1890,6 +1913,7 @@
                printk(BIOS_DEBUG, "Single Channel 0 only.\n");
        }
 
+       /* Now disable channel XORing */
        reg32 |= (1 << 10);
 
        MCHBAR32(DCC) = reg32;
@@ -1960,7 +1984,7 @@
                if (voltage == VOLTAGE_1_05)
                        freq = CRCLK_250MHz;
                else
-                       freq = CRCLK_400MHz;
+                       freq = CRCLK_400MHz; /* 1.5V requires 400MHz */
                break;
        case GFX_FREQUENCY_CAP_250MHZ: freq = CRCLK_250MHz; break;
        case GFX_FREQUENCY_CAP_200MHZ: freq = CRCLK_200MHz; break;
@@ -2096,7 +2120,7 @@
        clkcfg |= (1 << 10);
        MCHBAR32(CLKCFG) = clkcfg;
 
-       __asm__ __volatile__ (
+       asm volatile (
                "       movl $0x100, %%ecx\n"
                "delay_update:\n"
                "       nop\n"
@@ -2106,7 +2130,7 @@
                "       loop delay_update\n"
                : /* No outputs */
                : /* No inputs */
-               : "%ecx"
+               : "%ecx", "memory"
                );
 
        clkcfg &= ~(1 << 10);
@@ -2136,7 +2160,7 @@
 
                0x08040120, 0x00000000, /* DDR400 FSB533 */
                0x00100401, 0x00000000, /* DDR533 FSB533 */
-               0xffffffff, 0xffffffff, /*  nonexistant  */
+               0x00010402, 0x00000000, /* DDR667 FSB533 - fake values */
 
                0x04020120, 0x00000010, /* DDR400 FSB667 */
                0x10040280, 0x00000040, /* DDR533 FSB667 */
@@ -2615,6 +2639,7 @@
         * 0x30/0x32.
         */
 
+       /* TODO This is not implemented yet. Volunteers? */
 }
 
 static void sdram_save_receive_enable(void)
@@ -3007,8 +3032,6 @@
        struct sys_info sysinfo;
        u8 reg8, cas_mask;
 
-       sdram_detect_errors();
-
        printk(BIOS_DEBUG, "Setting up RAM controller.\n");
 
        memset(&sysinfo, 0, sizeof(sysinfo));
@@ -3018,6 +3041,9 @@
        /* Look at the type of DIMMs and verify all DIMMs are x8 or x16 width */
        sdram_get_dram_configuration(&sysinfo);
 
+       /* If error, do cold boot */
+       sdram_detect_errors(&sysinfo);
+
        /* Check whether we have stacked DIMMs */
        sdram_verify_package_type(&sysinfo);
 

Modified: trunk/src/northbridge/intel/i945/udelay.c
==============================================================================
--- trunk/src/northbridge/intel/i945/udelay.c   Fri May 14 19:15:57 2010        
(r5551)
+++ trunk/src/northbridge/intel/i945/udelay.c   Fri May 14 21:09:20 2010        
(r5552)
@@ -17,6 +17,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <delay.h>
 #include <cpu/x86/tsc.h>
 #include <cpu/x86/msr.h>
 
@@ -24,7 +25,7 @@
  * Intel Core(tm) cpus always run the TSC at the maximum possible CPU clock
  */
 
-static void udelay(u32 us)
+void udelay(u32 us)
 {
        u32 dword;
        tsc_t tsc, tsc1, tscd;

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to