On 05/28/2010 12:30 AM, Nils wrote:
Hi Oliver,
You wrote:
I'll check the rom as advised on the list; but I wouldn't be supprised
if it was; the IDE port is free and unused
I think the operating system is in your ide flash board that is laying
upside down in the corner of your S10 on the photo.(it belongs in the
ide slot)
I then wonder, how the S50 would look like and compares to the S10 ...
I`l send you a few photos.(i don`t know if the big photos are
appreciated on the list)
But i can say that on first glance it looks like they are the same.
Greetings,Nils
Your board looks identical. like exactly the same. I notice you have
a pin in BT1? is that to hook up an internal mini battery to keep the
bios from resetting?
I notice you removed your bioschip as well, I take it that's for
testing? I doubt the unit does anything without the bios?
Also I bet, that that IDE flash module yours has, is the 128mb flash
from the specs. This confirms my suspicion that the S*0 series don't
utilize the onboard flash possibility the CS5536 has. I read in the
specs of the CS5535/6 that you can use the bios to choose whether to use
one of the ports as an external IDE port, or internal flash device (I
doubt it's in the geode chip) but you have to use the bios to activate
one of the two, but never both at the same time.
Since the S10 does try to boot from the IDE module (based on activity
led on it) when selecting the IDE option (PXE/USB/IDE are the only
options) it can enable it successfully. However if it is not booting
from IDE module, it disables the IDE ports. If I could only get
something bootable into that socket, I'd be able to take it from there ...
I'm thinking now of using setpci to just force the port on and hope for
the best.
BTW, do you actually have Coreboot +seabios working on an S50? Also
could you paste me your lspci -vvvnnn; specifically for the IDE controller?
Thanks,
Oliver
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
