> The seabios web page has links to prebuilt binaries. You > could start off using one of these known-good seabios > binaries to eliminate unknowns. I will do it. I built my own seabios as i saw that the prebuilt version has a size of 1MB, and previous revision only around 100KB, that's why. I will give it a try and let you know.
> If you see the F12 message on the connected monitor, then > a suitable video bios has been found and used. Good to know. > By the way, I have this exact board sitting on the shelf. > If I can dig up a suitable power supply, I might give it > a try. It would be a good idea, but only if you have time and i have many things still to try to get this board working with coreboot, and i have good hope. I didn't had time to check system logs for example. Cheers, Frédéric -----Message d'origine----- De : Scott Duplichan [mailto:[email protected]] Envoyé : jeudi 16 septembre 2010 23:45 À : STEMMELIN, FREDERIC (FREDERIC)** CTR **; [email protected] Objet : Re: [coreboot] First coreboot build for Tyan s2895 K8WE mobo with seabios payload, computer starts, but graphical ubuntu 64bits is crashing ]Now i have a 3 questions for you: ]The build seabios (bios.bin.elf) is about 1MB in size..., The seabios web page has links to prebuilt binaries. You could start off using one of these known-good seabios binaries to eliminate unknowns. ]I didnt put VGA bios so far into the coreboot.rom. If you see the F12 message on the connected monitor, then a suitable video bios has been found and used. By the way, I have this exact board sitting on the shelf. If I can dig up a suitable power supply, I might give it a try. Thanks, Scott -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
