See patch.
rename CONFIG_SERIAL_POST to CONFIG_CONSOLE_POST
because that is what it does.
Signed-off-by: Stefan Reinauer <reina...@google.com>
Index: src/console/Kconfig
===================================================================
--- src/console/Kconfig (revision 6293)
+++ src/console/Kconfig (working copy)
@@ -326,14 +326,14 @@
bool "Don't show any POST codes"
default n
-config SERIAL_POST
- bool "Show POST codes on the serial port console"
- depends on CONSOLE_SERIAL8250 && !NO_POST
+config CONSOLE_POST
+ bool "Show POST codes on the debug console"
+ depends on !NO_POST
default n
help
If enabled, coreboot will additionally print POST codes (which are
usually displayed using a so-called "POST card" ISA/PCI/PCI-E
- device) on the serial console.
+ device) on the debug console.
endmenu
Index: src/console/post.c
===================================================================
--- src/console/post.c (revision 6293)
+++ src/console/post.c (working copy)
@@ -27,7 +27,7 @@
void post_code(uint8_t value)
{
#if !defined(CONFIG_NO_POST) || CONFIG_NO_POST==0
-#if CONFIG_SERIAL_POST==1
+#if CONFIG_CONSOLE_POST==1
print_emerg("POST: 0x");
print_emerg_hex8(value);
print_emerg("\n");
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
