On Sat, Feb 19, 2011 at 06:26:30PM -0500, jarray52 jarray52 wrote: > Hi, > > My HP Proliant dl145 g3 with Coreboot Bios and SeaBIOS payload cannot read > my hard disk. Here is the serial console output. > > http://coreboot.pastebin.com/HYee3u0t > > For easy reference, here is the coreboot page on the HP Proliant dl145 g3. > > http://www.coreboot.org/HP_DL145_G3 > > To ensure the problem was not caused by an HP BIOS or the LSI SAS controller > raid initialization of hard drives, I used a hard drive with OS created on a > non HP(Asus) without either hardware or software raid. No hard drive with > boot sector was readable by coreboot/seabios.
The log shows SeaBIOS found an ATA controller, but did not find any drives attached to the controller. It did not find an option rom on any cards - so no scsi option rom was run. Can you post the output of lspci and identify which device you expected to boot from? -Kevin -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot