Well, sorry about the noise. I forgot to mention that most of the RAM init I found was in the raminit.c of each of the northbridge. Is there any other important file(s) that I missed?
Thanks, Darmawan On 2/20/12, Darmawan Salihun <darmawan.sali...@gmail.com> wrote: > Hi Ron, > > I've been looking for DDR-SDRAM start-up tutorial. Is there any on the > web outside of the JEDEC specs? Anyway, where are the codes located in > the Coreboot source ? is it on the motherboard-specific codes? > > TIA, > > Darmawan > > On 2/15/12, ron minnich <rminn...@gmail.com> wrote: >> reading your note leads me to believe you are not familiar with how >> sdram startup works. It's a lot more than just setting one register. >> >> ron >> >> -- >> coreboot mailing list: coreboot@coreboot.org >> http://www.coreboot.org/mailman/listinfo/coreboot >> > > > -- > -------------------------------------------------------------------- > -= Human knowledge belongs to the world =- > -- -------------------------------------------------------------------- -= Human knowledge belongs to the world =- -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot