Kyösti Mälkki ([email protected]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/643
-gerrit commit 33fd183f1da7a734647fc876d607785990fc6d90 Author: Kyösti Mälkki <[email protected]> Date: Tue Feb 28 01:45:44 2012 +0200 Intel cpus: apply some good programming practices in new CAR Delete dead CAR code and whitespace fixes. Replace cryptic 32bit hex values with existing LAPIC definitions. Do not assume state of direction flag before "rep" instruction. Do not load immediate values on temporary registers when not needed. Parameter pushed on stack was not popped (or flushed) after returning from call. This is a sort-of memory leak if multiple call's are implemented the same way. Change-Id: Ibb93e889b3a0af87b89345c462e331881e78686a Signed-off-by: Kyösti Mälkki <[email protected]> --- src/cpu/intel/car/cache_as_ram_ht.inc | 39 ++++++++++++-------------------- 1 files changed, 15 insertions(+), 24 deletions(-) diff --git a/src/cpu/intel/car/cache_as_ram_ht.inc b/src/cpu/intel/car/cache_as_ram_ht.inc index ed207db..a6cbd6b 100644 --- a/src/cpu/intel/car/cache_as_ram_ht.inc +++ b/src/cpu/intel/car/cache_as_ram_ht.inc @@ -21,6 +21,10 @@ #include <cpu/x86/stack.h> #include <cpu/x86/mtrr.h> #include <cpu/x86/post_code.h> +#include <cpu/x86/lapic_def.h> + +/* Macro to access Local APIC registers at default base. */ +#define LAPIC(x) $(LAPIC_DEFAULT_BASE | LAPIC_ ## x) #define CPU_MAXPHYADDR 36 #define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYADDR - 32) - 1) @@ -38,9 +42,9 @@ cache_as_ram: post_code(0x20) /* Send INIT IPI to all excluding ourself. */ - movl $0x000C4500, %eax - movl $0xFEE00300, %esi - movl %eax, (%esi) + movl LAPIC(ICR), %edi + movl $(LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | LAPIC_DM_INIT), %eax + movl %eax, (%edi) /* Zero out all fixed range and variable range MTRRs. */ movl $mtrr_table, %esi @@ -86,17 +90,16 @@ clear_mtrrs: wrmsr /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax + movl %cr0, %eax andl $(~((1 << 30) | (1 << 29))), %eax invd movl %eax, %cr0 /* Clear the cache memory reagion. */ - movl $CACHE_AS_RAM_BASE, %esi - movl %esi, %edi - movl $(CACHE_AS_RAM_SIZE / 4), %ecx - // movl $0x23322332, %eax + cld xorl %eax, %eax + movl $CACHE_AS_RAM_BASE, %edi + movl $(CACHE_AS_RAM_SIZE / 4), %ecx rep stosl /* Enable Cache-as-RAM mode by disabling cache. */ @@ -131,11 +134,10 @@ clear_mtrrs: /* Set up the stack pointer. */ #if CONFIG_USBDEBUG /* Leave some space for the struct ehci_debug_info. */ - movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4 - 128), %eax + movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4 - 128), %esp #else - movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %eax + movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %esp #endif - movl %eax, %esp /* Restore the BIST result. */ movl %ebp, %eax @@ -146,6 +148,7 @@ clear_mtrrs: /* Call romstage.c main function. */ call main + addl $4, %esp post_code(0x2f) @@ -167,18 +170,6 @@ clear_mtrrs: post_code(0x31) invd -#if 0 - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(0), %ecx - wrmsr - movl $MTRRphysMask_MSR(0), %ecx - wrmsr - movl $MTRRphysBase_MSR(1), %ecx - wrmsr - movl $MTRRphysMask_MSR(1), %ecx - wrmsr -#endif post_code(0x33) @@ -196,7 +187,7 @@ clear_mtrrs: post_code(0x38) - /* Enable Write Back and Speculative Reads for the first 1MB. */ + /* Enable Write Back and Speculative Reads for low RAM. */ movl $MTRRphysBase_MSR(0), %ecx movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax xorl %edx, %edx -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
