2014-02-07 Andy Pont <andy.p...@sdcsystems.com>: > Hello! Hello!
> > I am trying to setup a build environment on 64bit CentOS 6.5 platform to be > able to build coreboot. I have cloned the coreboot sources from git and > have run the following commands: > > make crossgcc <-- to build the cross compilers > make menuconfig <-- to create the default .config file > make <-- to build the default configuration The default target is qemu, but you are likely aware of that. > > It runs for a while then when it tries to build the default seabios payload > I get the following (from make V=1): > > Compiling IASL > /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt.hex > cpp -P src/acpi-dsdt.dsl > > /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt.dsl.i.orig > > python ./tools/acpi_extract_preprocess.py > /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt.dsl.i.orig > > /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt.dsl.i Which version of python are you using here? My build box uses 2.7.6 > > /home/andy.pont/Software/coreboot/util/crossgcc/xgcc/bin/iasl -Pn -vs -l -tc > -p /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt > /home/andy.pont/Software/coreboot/build/seabios/out/acpi-dsdt.dsl.i > Error 6092 - Could not open file "(null)" (Permission denied) > > Have I missed something obvious or can someone guide me in the right > direction to get the default environment working before I start modifying > things? I ran the steps, with a minor tuning, that you mentioned: $ make -j4 crossgcc $ make menuconfig $ make That didn't error out, on a 64-bit debian testing machine. Can you show the content of .xcompile, found in the top directory where you cloned coreboot into? > > Thanks in advance, > > Andy. HTH, Idwer -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
