Hi,Mark Mason Have you resolved this issue? Maybe you can uncomment #define IDSOPT_TRACING_ENABLED TRUE in src/mainboard/asrock/imb-a180/OptionsIds.h. Then you can get more debug message in Agesa. Try to debug into AmdInitMid() in src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitMid.c to see where the problem is.
Yours sincerely, WANG Siyuan On Sat, Feb 8, 2014 at 2:23 AM, Mark C. Mason <m...@edt.com> wrote: > > I'm new to coreboot, and I'm working to use it with an ASROCK IMB-A180, > the H version with the LVDS port. > > I've read previous posts regarding the "IMB-A180 won't boot" on this group, > and tried the .config that was posted, but the result is the same. > > The debugging output shows things progressing until > agesawwrapper_amdinitmid > is called, then the boot restarts, then stops cold at the same point: > > PCI: 00:18.4 > PCI: 00:18.5 > Done allocating resources. > BS: BS_DEV_RESOURCES times (us): entry 0 run 1095130 exit 0 > POST: 0x74 > Enabling resources... > > Fam16 - domain_enable_resources: AmdInitMid. > agesawrapper_amdinitmid ^@^@^@^@佚沈h褕<95><89>蝸捄4.0-5169-g9d1d740 Tue > Feb 4 16:46:38 PST 2014 starting... > > Any help with this would be greatly appreciated. Full serial debug output > then .config are attached below. > > Best regards, > > Mark Mason > Engineering Design Team > > > > -- > coreboot mailing list: coreboot@coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot