Wang Fei,
The I/O port base address was problem. I changed it to 0x2f8, and I am seeing seabios output now. Thanks! Wen From: WANG FEI [mailto:wangfei.ji...@gmail.com] Sent: Tuesday, July 15, 2014 8:37 AM To: Paul Menzel Cc: coreboot; Wen Wang Subject: Re: [coreboot] sgabios no console output from Seabios (was: coreboot Digest, Vol 113, Issue 17) Wang Wen, I found following message in the coreboot-seabios log, [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.3.4-5.fc17.x86_64 root=UUID=c4d4a429-d880-4caa-831e-9e95b5595f67 ro rd.md <http://rd.md> =0 rd.lvm=0 rd.dm <http://rd.dm> =0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 console=ttyS1,115200n8 It shows "console=ttyS1,115200n8", it means the Linux kernel is using ttyS1 as the primary serial console, which is I/O port 0x2f8. But the seabios configure file shows seabios is configured using I/O port 0x3f8. it might be the problem. Please run "make menuconfig" in seabios and reconfigure the serial port to 0x2f8, let us know any difference. -Wang Fei On Mon, Jul 14, 2014 at 9:53 PM, Paul Menzel <paulepan...@users.sourceforge.net <mailto:paulepan...@users.sourceforge.net> > wrote: Dear Wen, Am Montag, den 14.07.2014, 11:32 -0400 schrieb Wen Wang: > Thanks for looking into to it! > > I pulled the seabios tree and built seabios manually (.config shown > below). I then loaded seabios/out/bios.bin.elf as coreboot payload and > sgabios as option rom. Unfortunately the same result, no output from > seabios at all. If you build and run the utility `cbmem` as shown below, what is the output of the last two commands? $ cd util/cbmem $ make $ sudo cbmem -l $ sudo cbmem -c Thanks, Paul -- coreboot mailing list: coreboot@coreboot.org <mailto:coreboot@coreboot.org> http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot