On 3/8/15, Kyösti Mälkki <kyosti.mal...@gmail.com> wrote: > On Sun, 2015-03-08 at 20:26 +0700, Darmawan Salihun wrote: >> Hi, >> >> I just want to verify has anyone tested the ITE IT8718F superio support? >> Over at: http://www.coreboot.org/Supported_Motherboards >> all motherboards mentioned are in the unknown status at the moment. >> > > Hi, > > key features of this superio were tested around 2010 when the first > boards with it got their coreboot port completed. By 2014, when our > supported boards wikipage was changed to collect reports of working > builds, this small selection of boards had already become obsolete > enough so that nobody has bothered to test and report.
I see. This is indeed an old development board. I dust it off because it has complete documentation. Therefore, theoretically should be easy enough to work with for Coreboot porting. > > To have a working superio depends on a couple of external parameters. > One is to route all the required IO ranges (including 2e/4e) to LPC bus, > second is to confirm superio has 24/48 MHz clock input. In some cases > 48MHz clock requires GPIO programming on southbridge. > OK. Thanks for the hint ;-) Kind Regards, Darmawan -------------------------------------------------------------------- -= Знания людей принадлежат миру =- [-Human knowledge belongs to the world-] -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot