You might try a different video card. There's an issue in the video bios of the aspeed card that came with the mohon peak.
martin On Tue, Feb 2, 2016 at 00:41 김유석 <poplin...@gmail.com> wrote: > Dear sir. > > My ENV is see below. > > *EVB : Intel rangeley Mohon Peak CRB* > > > This time, I was download the coreboot from git. > > poplinux@raw work $ > git clone http://review.coreboot.org/coreboot.git > ./ > poplinux@raw work $ > cd coreboot > poplinux@raw coreboot $ > git submodule update --init --checkout > > Next, *run make menuconfig* and set-up to mohon peak CRB and save & exit > > * Mainboa**rd* > Mainboard vendor (*Intel*) ---> > Mainboard model (*Mohon Peak CRB*) ---> > [ ] Configure defaults for the Intel FSP package > ROM chip size (2048 KB (2 MB)) ---> > (0x00200000) Size of CBFS filesystem in ROM > () fmap description file in fmd format > > Next, I'm try to build core boot. > > poplinux@raw coreboot $ > make > GEN generated/bootblock.ld > CP bootblock/arch/x86/bootblock.ld > LINK cbfs/fallback/bootblock.debug > OBJCOPY cbfs/fallback/bootblock.elf > OBJCOPY bootblock.raw.bin > Checking out SeaBIOS revision 01a84bea2d28a19d2405c1ecac4bdef17683cc0c > Switched to branch 'master' > > Performing operation on 'COREBOOT' region... > Name Offset Type Size > cbfs master header 0x0 cbfs header 32 > fallback/romstage 0x80 stage 22684 > cpu_microcode_blob.bin 0x5980 microcode 0 > config 0x5a00 raw 127 > revision 0x5ac0 raw 570 > cmos_layout.bin 0x5d40 cmos_layout 1316 > fallback/dsdt.aml 0x62c0 raw 7952 > payload_config 0x8240 raw 1574 > payload_revision 0x88c0 raw 237 > (empty) 0x8a00 null 29848 > mrc.cache 0xfec0 mrc_cache 65536 > fallback/ramstage 0x1ff00 stage 46922 > fallback/payload 0x2b6c0 payload 61122 > (empty) 0x3a5c0 null 1856216 > bootblock 0x1ff8c0 bootblock 1528 > > Finally, I'm got a coreboot image. > > > poplinux@raw build $ > ls build/coreboot.rom > build/coreboot.rom > poplinux@raw build $ > ./build/cbfstool build/coreboot.rom print > Performing operation on 'COREBOOT' region... > Name Offset Type Size > cbfs master header 0x0 cbfs header 32 > fallback/romstage 0x80 stage 22684 > cpu_microcode_blob.bin 0x5980 microcode 0 > config 0x5a00 raw 127 > revision 0x5ac0 raw 570 > cmos_layout.bin 0x5d40 cmos_layout 1316 > fallback/dsdt.aml 0x62c0 raw 7952 > payload_config 0x8240 raw 1574 > payload_revision 0x88c0 raw 237 > (empty) 0x8a00 null 29848 > mrc.cache 0xfec0 mrc_cache 65536 > fallback/ramstage 0x1ff00 stage 46922 > fallback/payload 0x2b6c0 payload 61122 > (empty) 0x3a5c0 null 1856216 > bootblock 0x1ff8c0 bootblock 1528 > > > And I'm write image to my EVB using *ALL-100 Gang-writ**er*. > spi flash's write *start address is set 0x00000000*. write it success. > > And I'm attach the flash memory to my EVB. > > And power-up the my EVB. But can't see any message on my monitor and > serial port both. > > > *Why did not display any message? * > *A**nd could you support correct configuration file for my EVB?* > > Thank you. > > > > > > > -- > coreboot mailing list: coreboot@coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot