Hi Zoran,
appreciate the offer, and I'll try to clarify things:
On 5/16/2016 5:07 AM, Zoran Stojsavljevic wrote:
Hello Matt,
I'll try to help you... Please, do understand that I did not get well
what really you are trying to do. Let us do one step at the time.
I'm trying to get the board google/ninja (a Baytrail-based Chromebox)
working with upstream coreboot. Original google source here:
https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/firmware-ninja-5216.383.B
I've already upstreamed several other google boards so I'm familiar with
the process :)
This step: 2) video output works properly for SeaBIOS and
grub/syslinux, but output is disabled once the OS / kernel driver loads.
_______
What I am getting from this email is the following (correct me if I am
wrong): BYT-FSP -> Coreboot -> (payload) SeaBIOS -> grub (2.0???) ->
Linux kernel 3/4.x.y (?).
I'm not using FSP, using soc/intel/baytrail (not fsp_baytrail) since the
board was not originally set up to do so, and would require a bit of
reworking (without any obvious benefit). So coreboot->SeaBIOS (running
vbios)->grub/syslinux->linux kernel 3/4.x
Now. If you use as payload SeaBIOS, my best understanding is that
you'll use CSM (Compatibility Support Mode). So, in other words,
you'll use (if you will?) in Coreboot vBIOS (not GOP driver). Now,
furthermore, you MUST use vBIOS, since you are using SeaBIOS. And
Linux will use vBIOS (not GOP driver), since you'll pass INT
0x15 mechanisms for Linux GFX (using mandatory vBIOS passed from
Coreboot), enforced from SeaBIOS - CSM?!
CSM mode is only needed when Tianocore is the primary payload, since
SeaBIOS is primary it is simply set up as a coreboot payload. I plan to
use Tiancore + SeaBIOS/CSM eventually, but wanted SeaBIOS alone working
first (since that's all my firmware releases to date have been).
coreboot isn't running the vbios, just SeaBIOS (though I tried it both
ways, with coreboot running the vbios first; there was no change).
The question here is the following: why, for the change, you do not
use as payload TianoCore? This one is UEFI compatible, and very well
suits UEFI compliant Linux? In other words, you will use Linux as UEFI
compliant/compatible OS. Compliant to Tiano Core, which brings to you
UEFI features (initialized by default with Linux). Simply and plain...
And see what will happen?
I actually did try Tianocore as the primary payload and had the exact
same issues, so I went back to SeaBIOS since I know that works in
conjunction with the factory firmware.
Final line: I suspect, you did not built-in in Coreboot vBIOS package
and vBIOS init (just serial output), which is, using SeaBIOS payload
(CSM mechanism), I guess, mandatory (for Linux to overtake/inherit
legacy, to work with GFX).
Thank you,
Zoran
I'm not quite sure what you're saying here. If you mean that I did not
have coreboot perform the video init, then I did try it both ways. On
all the other boxes (ie, no built-in display) I've upstreamed, it's not
been necessary to have coreboot run the vbios, only SeaBIOS.
thanks,
Matt
On Sun, May 15, 2016 at 12:19 AM, Matt DeVillier
<matt.devill...@gmail.com <mailto:matt.devill...@gmail.com>> wrote:
Greetings all! Currently I'm working on getting upstream coreboot
+ SeaBIOS working on a Baytrail-based ChromeOS device (NINJA /
AOpen Chromebox commerical). After resolving some config issues
which prevented the board from booting, I'm left with two issues
on which I'm stuck:
1) the internal emmc / sdhci controller fails to initialize, and
is unavailable for boot or OS installation
2) video output works properly for SeaBIOS and grub/syslinux, but
output is disabled once the OS / kernel driver loads
For the emmc, cbmem shows that the sdhci controller is timing out
after setting the initial frequency, somewhere after line 410 of
seabios/src/hw/sdcard.c. Since the same exact SeaBIOS payload
works properly with the stock ChromeOS firmware (in both the
RW_LEGACY and BOOT_STUB slots), I suspect that the issue is with
coreboot, but the SoC init is pretty much identical between
upstream and NINJA's CrOS branch (save for a few base addresses
and offset calculations), so not sure where to start looking.
I've also tried putting the sdhci controller back into PCI mode
(vs ACPI) which had no effect.
For the video output, the same vgabios file is being used as stock
CrOS, and same SeaBIOS payload. The i915 kernel driver reports
that no displays are connected, and there are some errors in the
drm module just prior. I tested with a few different flavors of
linux as well as Windows 10, to be certain it wasn't driver-related.
Attached are the cbmem and kernel logs from both working (stock
CroS firmware + upstream SeaBIOS/BOOT_STUB) and non-working
(upstream coreboot+SeaBIOS) cases.
As the board hasn't been officially upstreamed yet (something I
will do once these issues are resolved), source can be found in my
github repo here (it's just 3 commits on top of the current master
branch): https://github.com/MattDevo/coreboot/tree/ninja_upstream
Hopefully someone can point me in the right direction here :)
cheers,
Matt
--
coreboot mailing list: coreboot@coreboot.org
<mailto:coreboot@coreboot.org>
https://www.coreboot.org/mailman/listinfo/coreboot
--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot