First you'll need to clone radare2 from git. Then apply the patch from https://github.com/radare/radare2/pull/6125 and build and install radare. After opening the binary, enter 'Vp' then follow the [1] shortcut on the far right. 's f000:0' will seek to the start of the bootblock.
2016-11-02 6:59 GMT+01:00 Riko Ho <[email protected]>: > Everyone, Idwer, > > I have radare question : > > I played until this point : > c:>radare2 -e asm.bits=16 -e io.va=true i946gz.bin > -- radare2 is WYSIWYF - what you see is what you fix > [f000:fff0]> S $s-0x10000 0xF000:0x0000 0x10000 0x10000 bootblk rwx > [f000:fff0]> e asm.segoff=true > [f000:fff0]> s 0xf000:0xffff0 > [f000:ffff]> > > How can I see the assembler code from there ? It's started from FFFF0....I'm > sure the last byte instruction is jump to 0x00000 > > Cheers -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
