On Tue, Nov 8, 2016 at 11:44 AM, Andreas Galauner <[email protected]> wrote: > Hi all, > > I'm currently porting coreboot to a new Board with an Intel Braswell on it. > I finally managed to get to a point where Coreboot wants to load a > payload, so all the basic hardware initialization tasks are done. > > During bootup, I get a message that the FSP didn't pass back a > EFI_PEI_GRAPHICS_INFO_HOB. > > I' supplying the FSP with a VBT that the engineer of the board sent me. > I also extracted the VBT from a UEFI image that is already working on > the board and the files are the same. So, I guess that the config data > is valid. Still, none of the outputs seem to get configured by the FSP > at all. > > Any hints what I can do to solve this? Is there any debug information > available from the FSP why it didn't initialize the graphics hardware?
Do you have CONFIG_GOP_SUPPORT enabled? > > Thanks, > - Andy > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
