-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 We are pleased to announce that the OpenBMC port for the KGPE-D16 has reached the first release stage!
https://www.raptorengineering.com/coreboot/kgpe-d16-bmc-port-status.php While it has inherited some of the rough edges of its Facebook predecessor in terms of its external interfaces, this OpenBMC port is fully functional for system control and thermal management. We have tested both ASMB4 and ASMB5 modules with the KGPE-D16 and both function the same, so feel free to purchase whichever one is more readily available in your location. The weakest part of the port at this time is IPMI (provided by ipmid). Only the chassis status command really works at this point, but all of the "plumbing" is present that is required for both external (network-based) and internal (LPC KCS-based) communication; the ipmitool utility does have the ability to communicate with the BMC as of this release. You may need to modprobe ipmi_si and ipmi_devintf before ipmitool will function, depending on your distribution's default settings. One final note: if you enable OpenBMC, don't try to run fan-control under Linux. It will cause the hardware control chip on the shared I2C bus to malfunction, and the BMC will detect this and shut the entire system down to protect it from overtemperature. No permanent harm will be done, but data loss is possible. The best thing to do is to make sure the w83795 module is not loaded on the host. Also, since I think this was buried in another Email thread, I'd like to mention again that we are offering a 75% discount to the coreboot community on the REACTS system [1] in an effort to get higher test coverage. Use this promotional code when checking out to apply the discount: COREBOOTREACTS17 Let me know what you think of the OpenBMC system. We're considering allowing bugs to be tracked on GitHub; is this something the community wants to see or would a separate Bugzilla type install be preferred? We want to provide the infrastructure needed for the community to start working with and enhancing this port, so suggestions and comments are welcome! [1] https://www.raptorengineering.com/content/REACTS/intro.html - -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJZpbFQAAoJEK+E3vEXDOFbWGsH/1WN4KMm1GCYUVdcj2wdD1XF EkZ5H6Yu6p+8Fj+WkOaNsHb8xSFG5rqPPZC8ubT+tt4gcUqsgFzYLYDXACH6y4Yc RFoSHd7rXYB9uBG1uzZIhQovfL65a6Y5+LTuhL9CYNXP7iR64L44NjgD1HFv8BS7 ryJ+K/LE941uOin8GQshoFwJ/i88uOMpKunF5Ef+SnGr4VhE5OvUrulpo5iJ/62J Ia3v9zD9hTppGyi2MNydR7qy5kVrABHiq+6C2LiQtpfBx/GOwNevZbbvt+aswEnc jEItl/I6YBTAMyT4eGdc5LW+0H83sw8mwynK1DTzZXGGTKw/xvkun5UcvrvU4Q8= =dqp/ -----END PGP SIGNATURE----- -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
