They might not be the same. I would try using ifdtool to get an mrc.bin from a
rom for your specific board.
Rob
On Jan 24, 2018 5:53 AM, Zheng Bao <fishb...@hotmail.com> wrote:
>
> Hi, All,
> The output of my board is attached below. The MRC.bin is extracted from
> panther, which I assume matches my board.
> But the meminit fails. Do all the haswell use the same MRC, or how can I
> decide which mrc.bin is the one I should extract?
>
> Thanks.
>
> Zheng
>
> coreboot-4.6-894-ga26344d-dirty Wed Jan 24 05:38:45 UTC 2018 romstage
> starting...
> Disabling Watchdog reboot... done.
> SMBus controller enabled.
> Setting up static northbridge registers... done.
> Initializing Graphics...
> Back from haswell_early_initialization()
> CPU id(40651) ucode:0000001c Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz
> AES supported, TXT supported, VT supported
> PCH type: LP Premium, device id: 9c43, rev id 4
> Starting UEFI PEI System Agent ___
> CBFS: 'Master Header Locator' located CBFS at [300100:3fffc0)
> CBFS: Locating 'mrc.cache'
> CBFS: Found @ offset fec0 size 10000
> find_current_mrc_cache_local: No valid MRC cache found.
> CBFS: 'Master Header Locator' located CBFS at [300100:3fffc0)
> CBFS: Locating 'mrc.bin'
> CBFS: Found @ offset 9fec0 size 2eb04
> System Agent: Starting up...
> System Agent: Initializing PCH
> install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
> install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
> System Agent: Initializing PCH (SMBUS)
> System Agent: Initializing PCH (USB)
> System Agent: Initializing PCH (SA Init)
> System Agent: Initializing PCH (Me UMA)
> System Agent: Initializing Memory
> System Agent: Done.
> Sanity checking heap.
> sdram_initialize,153: rv=0
> here.
> sdram_initialize,186
> sdram_initialize,189
> ME: FW Partition Table : OK
> ME: Bringup Loader Failure : NO
> ME: Firmware Init Complete : NO
> ME: Manufacturing Mode : YES
> ME: Boot Options Present : NO
> ME: Update In Progress : NO
> ME: Current Working State : Normal
> ME: Current Operation State : Bring up
> ME: Current Operation Mode : Security Override via Jumper
> ME: Error Code : No Error
> ME: Progress Phase : BUP Phase
> ME: Power Management Event : Pseudo-global reset
> ME: Progress Phase State : 0x66
> RAM INIT FAILURE!
>
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot
