Yes, I cleaned the CPU before but it's obvious it wasn't shiny :-) .
I want to try your OpenBMC port. I readed I have to solder the 20 pin
connector.
Pin 1 is the squared shape, isn't it? But which is Pin 1 in the female
connector?
Best regards,
- Eli
On 14/02/18 23:42, Timothy Pearson wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Good to hear. I was going to mention bad CPU but that seemed unlikely;
on this end we always make sure the CPU contacts are shiny before
attempting boot so that could explain the discrepancy.
On 02/14/2018 04:38 PM, Elisenda Cuadros wrote:
Thank you for your reply Timothy.
I removed the heatsink and cleaned the cpu contacts.
Now it boots.
Thank you for your support.
Best regards,
- Eli
On 14/02/18 22:46, Timothy Pearson wrote:
Dead / incompatible DIMM, DIMM(s) in wrong slots, or damaged mainboard.
The fact that the vendor BIOS won't post is a very bad sign, since in
our experience the vendor BIOS is far more forgiving of faulty DIMMs
than coreboot (basically, the vendor BIOS will show something on the VGA
port even if the DIMMs are completely damaged and unable to properly
store data).
On 02/14/2018 03:28 PM, Elisenda Cuadros wrote:
Hello,
I recently bought an Asus KGPE-D16 board, with an Opteron 6238 and 4
Micron MT18JSF25672PDZ-1G4F1DD modules.
Firstly I tried to boot with vendor BIOS but I don't get any output
on VGA.
I have a PCI Post Card and it seems it arrives to 3E and then I think it
enters in a loop.
I flashed Coreboot with default settings just to try to get some more
useful logs. The result I think is more or less the same, it doesn't
arrive to payload.
Memory is installed in A2,B2,C2 and D2 slots.
I spent multiple hours trying to figure where is the problem.
Do you have any ideas?
I attach the console log.
Thanks in advance.
Best Regards,
- Eli
-- Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
- --
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJahLtgAAoJEK+E3vEXDOFbz0gH/0xK2nRVkWx5Q1NzIDlYaz7z
kfXfU2T5tCfZ4InylTPHgfGqdx4diChopz8hfRjqq9xUOjaqlZvus2jFaOveikUF
rvtlSnZCnUmZoULonoMDO0h0JTBxM7rkVrOR4abXmlpITvHXBLt5SwmVm69HVW/l
CSs/7MLTgDB4CaNk5j4aCnuZrQnSRR1ykbaKVmtJWhoGtW3n5RI1V8bdHJizyyKz
5AQWu2/VZEcZoJOHX65xheRKwAj9KcqJKwFyKb636SOAy20ZVR0lYLPzer6cZWvm
hAPmi6Yk/J3dptf7M90P+6CJhga1fxTubTie8dHu/BfYsNkED4qlfZPYp9c62OU=
=cUgx
-----END PGP SIGNATURE-----
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot
