That unfortunately did not help. Would it be possible to take a look at your .config? Perhaps I'll be able to spot something ________________________________ From: Matt DeVillier <matt.devill...@gmail.com> Sent: Wednesday, April 25, 2018 4:14 PM To: alexfein...@hotmail.com Cc: coreboot Subject: Re: [coreboot] ACPI error booting Windows
I have Windows booting on a KBL CrOS device, and looking at my tree, pretty sure the only change I have that would potentially address that error is adding the pcon value to the IGD ACPI OpRegion header: https://github.com/MattDevo/coreboot/commit/3349065354709c852765555168272469797dd3f6 there were a few others but they've all since been merged upstream On Wed, Apr 25, 2018 at 6:00 PM Alex Feinman <alexfein...@hotmail.com<mailto:alexfein...@hotmail.com>> wrote: I've built a Coreboot image (from the HEAD) for my custom Kaby Lake board. The build uses Chrome EC and is based on kblrvp3 mainboard configuration. Linux runs fine, but when I attempt to install Windows 10 (or boot a preinstalled Windows image from USB) I instantly get ACPI_BIOS_ERROR (0xC00000A5). There is a Microsoft document that provides a large amount of possible reasons for this error, however I can't even narrow it down because cleverly Windows 10 no longer prints the bug check parameters, at least not in this case. I would appreciate some pointers if possible. Thank you Alex -- coreboot mailing list: coreboot@coreboot.org<mailto:coreboot@coreboot.org> https://mail.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot
