Hello Ranga:
If you are using tianocore as payload you should choose vesa framebuffer option
and text mode in seabios
JT
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, November 8, 2018 1:08 PM, galla rao <galla.ra...@gmail.com> wrote:
> Hi All,
>
> Am facing Gfx Enablement failure, i don't see any Video output on my screen
>
> Config file has below settings
>
> CONFIG_VGA_BIOS_ID="8086,0f31"
> CONFIG_DRIVERS_PS2_KEYBOARD is not set
> CONFIG_ONBOARD_VGA_IS_PRIMARY=y
> CONFIG_VGA_BIOS=y
> CONFIG_UDELAY_IO is not set
> CONFIG_DCACHE_RAM_BASE=0xfef00000
> CONFIG_DCACHE_RAM_SIZE=0x4000
> CONFIG_ACPI_SSDTX_NUM=0
> CONFIG_VGA_BIOS_FILE="../intel/cpu/baytrail/vbios/Vga.dat"
> CONFIG_PCI_64BIT_PREF_MEM is not set
>
> BIOS log specific to Video output onto terminal
>
> ------------------------ VLV SSA Platform Policy dump Begin ---------------
> Graphics Configuration:
> GttSize : 2 MB
> IgdDvmt50PreAlloc : 2
> PrimaryDisplay : 0
> ApertureSize : 2
> Turbo Enable : 1
>
> IGD enabled.
>
> dGFXBase = 0x7BE00000
>
> Do i need to configure any setting in
> \FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.bsf file from BCT?
>
> Please let me know what could be the reason and if anyone has seen such
> behavior earlier
>
> Best Regards
> Ranga
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot
