Dear coreboot folks,
Making a Kaby Lake-U variant port [1], building an image, I notice the
log say the microcode update files sizes in the FIT table are 0.
Platform is: sklkbl
File build/coreboot.pre is 16777216 bytes
IFDTOOL me.bin -> coreboot.pre
Platform is: sklkbl
File build/coreboot.pre is 16777216 bytes
File me.bin is 3141632 bytes
Adding me.bin as the Intel ME section of build/coreboot.pre
Writing new image to build/coreboot.pre
IFDTOOL Unlocking Management Engine
Platform is: sklkbl
File build/coreboot.pre is 16777216 bytes
Writing new image to build/coreboot.pre
IFDTOOL Setting EM100 mode
Platform is: sklkbl
File build/coreboot.pre is 16777216 bytes
Writing new image to build/coreboot.pre
CBFS coreboot.rom
UPDATE-FIT
FIT table:
Index Type Addr Size
0 Microcode 0xffb5b710 0x00000000
1 Microcode 0xffb73f10 0x00000000
2 Microcode 0xffb8c710 0x00000000
CBFSLAYOUT coreboot.rom
Kind regards,
Paul
[1]: https://review.coreboot.org/c/coreboot/+/43760
"mb/clevo/kbl-u: Add Clevo N240BU as variant"
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
