Hi Max,
According to the pictures, R2.0 differs from R3.0 by the number of
PCIe slots
(maybe some ports will not work) and it looks like they are using a
different
SuperIO chip (you may not see the console in the COM port), maybe
there are
other differences... Regardless, you can try to run coreboot on your
board,
although I recommend analyzing the pad configuration using inteltool (get
a dump of the registers of the gpio controller):
$ sudo ./inteltool -G
and then compare this with the dump from R2.0 -
https://github.com/maxpoliak/inteltool-examples/blob/master/inteltool-asrock-h110m-dvs.log
<https://github.com/maxpoliak/inteltool-examples/blob/master/inteltool-asrock-h110m-dvs.log>
If there are differences, then you need to fix them in
https://github.com/coreboot/coreboot/blob/master/src/mainboard/asrock/h110m/include/gpio.h
<https://github.com/coreboot/coreboot/blob/master/src/mainboard/asrock/h110m/include/gpio.h>
This will avoid possible burnout of chips, transistors or any other
elements on
the board.
Thanks for the information. I don't have a board with me since I was
just considering buying one that's compatible with coreboot. It looks
like none of the other boards are suitable for my purposes unfortunately.
Best regards,
Alex
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
