Hi coreboot
I have a Clevo p950er laptop, and I'd love to run coreboot firmware. Is
it supported?
-Sal
cpu: 6-Core Intel Core i7-8750H
lspci -tvnn:
-[0000:00]-+-00.0 Intel Corporation 8th Gen Core Processor Host
Bridge/DRAM Registers [8086:3ec4]
+-01.0-[01]----00.0 NVIDIA Corporation GP104M [GeForce GTX
1070 Mobile] [10de:1ba1]
+-02.0 Intel Corporation CoffeeLake-H GT2 [UHD Graphics
630] [8086:3e9b]
+-08.0 Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 /
6th/7th/8th Gen Core Processor Gaussian Mixture Model [8086:1911]
+-12.0 Intel Corporation Cannon Lake PCH Thermal Controller
[8086:a379]
+-14.0 Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host
Controller [8086:a36d]
+-14.2 Intel Corporation Cannon Lake PCH Shared SRAM
[8086:a36f]
+-16.0 Intel Corporation Cannon Lake PCH HECI Controller
[8086:a360]
+-17.0 Intel Corporation Cannon Lake Mobile PCH SATA AHCI
Controller [8086:a353]
+-1d.0-[02]----00.0 Samsung Electronics Co Ltd NVMe SSD
Controller SM961/PM961/SM963 [144d:a804]
+-1d.5-[03]----00.0 Intel Corporation Wireless-AC 9260
[8086:2526]
+-1d.6-[04]----00.0 Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168]
+-1d.7-[05]----00.0 Realtek Semiconductor Co., Ltd. RTS5250
PCI Express Card Reader [10ec:5250]
+-1f.0 Intel Corporation HM470 Chipset LPC/eSPI Controller
[8086:a30d]
+-1f.3 Intel Corporation Cannon Lake PCH cAVS [8086:a348]
+-1f.4 Intel Corporation Cannon Lake PCH SMBus Controller
[8086:a323]
\-1f.5 Intel Corporation Cannon Lake PCH SPI Controller
[8086:a324]
superiotool -dV:
superiotool r4.14-1987-g90fcffb416
Probing for Aspeed Super I/O at 0x2e...
Found Aspeed AST2400 (id=0x00) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
val 85 87 06 01 00 00 00 00 00 00 00 00 01 00 00 00
def 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LDN 0x02 (SUART1)
idx 30 60 61 70 71 f0
val 00 02 f8 03 02 00
def 00 03 f8 04 02 RR
LDN 0x03 (SUART2)
idx 30 60 61 70 71 f0
val 00 00 00 00 00 00
def 00 02 f8 03 02 00
LDN 0x04 (SWC)
idx 30 60 61 62 63 64 65 66 67 70 71
val 00 00 00 00 00 00 00 00 00 00 01
def 00 08 e6 08 e0 08 e4 08 e8 09 01
LDN 0x05 (Keyboard config (KBC))
idx 30 60 61 62 63 70 71 72 73 f0
val 01 00 00 00 00 0c 01 00 00 00
def 00 00 60 00 64 01 02 0c 02 83
LDN 0x07 (GPIO)
idx 30 38 70 71
val 00 00 00 00
def 00 00 0b 01
LDN 0x0b (SUART3)
idx 30 60 61 70 71 f0
val 00 00 00 00 00 00
def 00 03 e8 06 02 00
LDN 0x0c (SUART4)
idx 30 60 61 70 71 f0
val 00 00 00 00 00 00
def 00 02 e8 05 02 00
LDN 0x0d (iLPC2AHB)
idx 30 70 71 f0 f1 f2 f3 f4 f5 f6 f7 f8 fe
val 00 00 00 00 00 00 00 00 00 00 00 00 00
def 00 09 01 NA NA NA NA NA NA NA NA 00 00
LDN 0x0e (Mailbox)
idx 30 60 61 70 71
val 00 00 00 00 00
def 00 08 c0 09 01
flashrom -p internal -V:
flashrom v1.2 on Linux 5.14.2-1-MANJARO (x86_64)
flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.6.4, GCC 9.3.0, little endian
Command line (3 args): flashrom -p internal -V
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing internal programmer
get_mtd_info: device_name: "BIOS", is_writeable: 0, numeraseregions: 0,
total_size: 16777216, erasesize: 4096
Cannot open file stream for /dev/mtd0
No coreboot table found.
Using Internal DMI decoder.
No DMI table found.
W836xx enter config mode worked or we were already in config mode.
W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 85.
Found ITE EC, ID 0x8587, Rev 0x06 on port 0x2e.
Found chipset "Intel HM370" with PCI ID 8086:a30d.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware
with it,
then please email a report to [email protected] including a verbose
(-V) log.
Thank you!
Enabling flash write... BIOS_SPI_BC = 0x88: BIOS Interface Lock-Down:
enabled, Boot BIOS Straps: 0x0 (SPI)
Top Swap: not enabled
SPI Read Configuration: prefetching enabled, caching enabled,
BIOS_CNTL = 0x89: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
Error accessing SPIBAR, 0x1000 bytes at 0x00000000fe010000
/dev/mem mmap failed: Operation not permitted
FAILED!
FATAL ERROR!
Error: Programmer initialization failed.
Restoring PCI config space for 00:1f:5 reg 0xdc
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
