Hi Mariusz I was inspired by the multi domain approach doc and got quite far already. I decided to allocate and attach domains at runtime for the moment instead of statically via the devicetree. In the future I think having devicetree structures makes a lot of sense, e.g. to provide stack specific configuration or derive the IIO bifurcation configuration from it.
I see that FSP sometimes does this virtual splitting but not always and just reports multiple PCI roots on one stack (via a HOB). I don't think splitting up a reported stack in multiple domains in coreboot is a good idea. This means you need to be aware of the downstream resources when just constraining the domain resources to the ones reported to be allocated to the stack. This agains means bypassing or redoing a lot of the coreboot resources allocation so I doubt this approach makes sense. I'm currently thinking that the multiple PCI root bus per domain approach is the easiest. It already works with some minor allocator changes. Kind regards Arthur On Tue, Mar 22, 2022 at 8:15 AM Mariusz Szafrański via coreboot < coreboot@coreboot.org> wrote: > Hi Arthur, > > In our multidomain based PoC in this situation (multiple root busses on > one stack) we "virtually" splitted this stack and its resource window to > two or more virtual stacks and later handled as separate stacks. > > Mariusz > > W dniu 17.03.2022 o 19:03, Arthur Heymans pisze: > > Hi > > > > I've recently tried to improve the soc/intel/xeon_sp codebase. > > I want to make it use more native coreboot structures and codeflows > > instead of parsing the FSP HOB again and again to do things. Ideally > > the HOB is parsed only once in ramstage, parsed into adequate native > > coreboot structures (struct device, struct bus, chip_info, ...) and > > used later on. > > > > The lowest hanging fruit in that effort is resource allocation. > > Currently the coreboot allocator is sort of hijacked by the soc code > > and done over again. > > The reason for this is that xeon_sp platforms operate a bit > > differently than most AMD and Intel Client hardware: there are > > multiple root busses. This means that there are PCI busses that are in > > use, but are not downstream from PCI bus 0. In hardware terminology > > those are the IIO and other type of Stacks. > > > > Each Stack has its own range of usable PCI Bus numbers and decoded IO > > and MEM spaces below and above 4G. I tried to map these hardware > > concepts to the existing coreboot 'domain' structure. Each domain has > > resource windows that are used to allocate children devices on, which > > would be the PCI devices on the stacks. > > The allocator needs some tweaks to allow for multiple resources of a > > type (MEM or IO), but nothing major. See > > https://review.coreboot.org/c/coreboot/+/62353/ and > > https://review.coreboot.org/c/coreboot/+/62865 (allocator > > rewrite/improvement based on Nico's excellent unmerged v4.5 work) This > > seems to work really well and arguably even better than how it is now > > with more elegant handling of above and below 4G resources. > > > > Now my question is the following: > > On some Stacks there are multiple root busses, but the resources need > > to be allocated on the same window. My initial idea was to add those > > root busses as separate struct bus in the domain->link_list. However > > currently the allocator assumes only one bus on domains (and bridges). > > In the code you'll see a lot of things like > > > > for (child = domain->link_list->children; child; child = child->sibling) > > .... > > > > This is fine if there is only one bus on the domain. > > Looping over link_list->next, struct bus'ses is certainly an option > > here, but I was told that having only one bus here was a design > > decision on the allocator v4 rewrite. I'm not sure how common that > > assumption is in the tree, so things could be broken in awkward ways. > > > > Do you have any suggestions to move forward? > > > > Kind regards > > > > Arthur Heymans > > > > > > _______________________________________________ > > coreboot mailing list -- coreboot@coreboot.org > > To unsubscribe send an email to coreboot-le...@coreboot.org > > _______________________________________________ > coreboot mailing list -- coreboot@coreboot.org > To unsubscribe send an email to coreboot-le...@coreboot.org >
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org