----- Original Message -----
Sent: Wednesday, January 10, 2001 9:31
PM
Subject: Re: [COUPERS-TECH] Pre Heat
Systems
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
A friend who has the misfortune to live far enough north to need pre-heat
built a pre-heater using a small propane fired turbine heater he got at the
hardware store. This little thing is about 8" dia and 18" long and uses
one of those shaded pole fan motors like you see in small exhaust fans.
He made a sheet metal splitter and then two peices of flexible aluminum duct
to position the heat at the cowl inlets. Being in an un-electrified
hangar he included in the package a little 125W inverter which these days only
cost about $25. This provided enough 110V for the fan motor. He
mounted the heater, a propane bottle and the inverter on a cheap two wheeler
which can be rolled to the front of the plane and then left free standing
while it heats the engine. I have attached a picture of the heater
used.
Dick in NM.
---------------------------------
to unsubscribe send mailto:[EMAIL PROTECTED]
____________________________________________________________
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
