----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Assuming you have the controls and hard lines disconnected and the wings off the center section should come out in about twenty minutes. Four bolts each side on the front spar and a handful of fastenings scattered around the rear. Turn the coupe upside down and support under the engine and the cockpit sills and remove the main gears. Even better, take the engine and frame off and stand it on its nose. Installation is just as simple, though you may need a pursuader to encourage the rear spar to slide in past the fuselage frame. Take the opportunity to dye-pen the root fittings and get inside to look for corrosion. For real peace of mind deskin it, blast and prime it and put it all back together with new hardware. If you want to talk it through give me a ring at work on 818.894.7111. Jimbo [EMAIL PROTECTED] wrote: > Any of you replaced the center section on a Coupe? About how long > does it take? What are the *general* steps required? > > Thanks. > > Joa > > __________________________________________________ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Learn More. Surf Less. Newsletters, Tips and Discussions on Topics You Choose. http://www.topica.com/partner/tag01 ==^================================================================
<<attachment: winmail.dat>>
