----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
----Original Message----- From: david abrams <[EMAIL PROTECTED]> To: Tom Laird-McConnell <[EMAIL PROTECTED]> Cc: Subject: Approval request for [EMAIL PROTECTED] Reply-To: Date: Wednesday, May 30, 2001 11:04 AM The message below was sent to the list coupers. To approve this message, simply forward the message to the following address: coupers-approve-[your [EMAIL PROTECTED] where the password is the moderation password set by the owner of the list. To reject the message, simply ignore it, and it will not be distributed to the list. Please note that we recommend that you forward the message as an attachment, because otherwise your mailer may wrap or otherwise change the original message. Also, please leave "Message Follows" and "Message Ends" separators intact, they are required for the message to be posted. [------ Original Message Follows ------] To: coupers <[EMAIL PROTECTED]> From: david abrams <[EMAIL PROTECTED]> Subject: RE: RE: Fuel pump gasket. Date: Wed, 30-May-2001 18:10:37 GMT Message-ID: <[EMAIL PROTECTED]> X-Topica-Id: <991246237.web004.1483.1000000> X-Topica-Loop: 700002394 I bought a bunch of the large round gasket for the pump top and the small one for the bolt from Aero Accessorries. Since they advertise in every Coupe Capers it is easy to find them - 800-822-3200 They are pretty cheap. I just have to work hard to not lose the envelope with them in it between annuals. David George Frebert wrote: > > Each year the FAA requires that the top of the fuel pump be removed to > check > the condition of the screen and possibe contamination. Unfortunately, I > have > not found anyone who sells the gasket. [------ End Of Original Message -------] ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
