----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Lynn,
The Marvel is on the engine Type Data Sheet so if you use the correct part
numbers it should only be a 337 at worst and I would think you could get
by
with a log entry. No STC would be required unless you wanted to use a part
number that was not called out such as a 0-200 carb. on the C-85.
Good luck.
Best regards,
Vern
[EMAIL PROTECTED]
l.com To: [EMAIL PROTECTED]
cc:
06/09/01 Subject: [COUPERS] Replacing
Stomberg with
02:28 PM Marvel Carburetor.
Please
respond to
IFLYSMODEL
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Coupers; Do any of you have paperwork on replacing the Stromberg
carburetor with a Marvel on a C75 or 85? Kim Santere thought he had a line
on
an STC, but we have not been able to find it. Any help would be greatly
appreciated.
Thanks
Lynn Nelsen N99387 52FL
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT
Or send an email To: [EMAIL PROTECTED]
This email was sent to: [EMAIL PROTECTED]
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
<<attachment: winmail.dat>>
