----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I get about 5.5/hr with a C-90 in an Alon. Leslie Holbrook Alon A2 N161LH (Flying Colors #1) Chester, CT 3B9 > From: Percy Wood >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >CC: [EMAIL PROTECTED] >Subject: Re: [COUPERS] hot floors >Date: Mon, 06 Aug 2001 21:17:16 -0700 > >----[Please read http://ercoupers.com/disclaimer.htm before >following any advice in this forum.]---- > >At 09:47 PM 8/6/01 -0400, you wrote: > >>any suggestions for cooling down a hot floor pan. mine is pretty >>tough on my >>feet when flying very long. > >The heat vent is not ducted through the floor, which is one problem. > The close >off for the cabin heat might be weak for another. Finally, the >firewall may be >leaking hot air, so check that. I just patched on mine, and I am >anxious >to see >if things improved. > >>What is every ones gallons per hr. I am at >>5.5 with my 85hp ercoupe > >You're probably about right there. I use 5 GPH for planning, then >factor a >significant fudge factor. > >"Fly with the fullest possible tanks, and the emptiest possible >bladder." > >Percy in Portland > > > > _____ Get your FREE download of MSN Explorer at http://explorer.msn.com <http://go.msn.com/bql/hmtag_itl_EN.asp> ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
