Greg and the Group, You are making me work too hard....
My Book of Ad's shows AD 52-02-02 ERCO..Applies to all model 415 series and models E anG aircraft.: 1. Before the next flight and at each 25 -hour inspection: a. inspect, for cracks, etc....... etc.... b. inspect the four no. 6-32 screws which attach the balance weight support------- 2. Before next flight and at each 100-hour inspection, thereafter, ..... etc... "If , with one aileron blocked in the neutral position, the total play of the other aileron, measured at the trailing edge, exceeds 7/16-inch, all joints and bearings should be checked and those which are loose should be tightened or replaced". 3. "If the aileron balance weights have been removed in accordance with ERCO Service Bulletin No. 57, Item 1 above and AD 47-20-06 do not apply. However, any previous cracks in the aileron skin or beam which occured prior to removal of the aileron balance weights must be repaired or the parts replaced. The free play referred to in Item 2 above must be reduced to 5/16-inch." 4. ----- This supersedes AD 49-02-02; the new material is contained in Item 3. I do not have an up to date listing of applicable AD's...Maybe there is one allowing larger play with the balance weights removed,,,,,but I do not think so...Check with your AI. Regards, Harry Francis Blacksburg, VA __________________________________________________________________________ ______ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] _____________________________________________________________ Want to find the best email lists? Check out the Topica 20! http://www.topica.com/topica20
<<attachment: winmail.dat>>
