----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Today I went out to the airport and put the second PTT, wired in parallel
with the one on the yoke (all cobbled up with MOLEX connectors so it can
be re-arranged when I change the yokes) in the panel. I put it just below
the intersection of an 'X' drawn between mixture, brake, throttle, and
brake.

I used an 'Alco' super-high-quality plunger momentary switch with a black
disk
stuck on a big fat metal plunger, and an 'over center' click action. Very 
1940's
aviation feeling, looks like it belongs there. In the process, I got a 
closer look at
the row of toggle switches over on the left, and was pleased to see
amperage
ratings on the tips of all of them. Breakers! I hadn't realized that. How 
nice! Real,
vintage looking, metal-handle, toggle, breakers! The etching of the
ratings 
is very
fine, and not visible except in the odd oblique light pattern I happened
to 
have.

Took it around the pattern and found that by pointing my index finger the
way Chico Marx plays the piano, I could key the mic.  Choke up halfway
on the throttle shaft, and the button falls 'easily to hand.'

No, in turbulence, I still have only one hand on the yoke. I tend to put
the
other on the throttle, ready to close it in case of an upset (I have a
vernier
throttle, so it doesn't move in the bumps).

I feel much better having the second button ready to go should the first 
fail again,
even though I've now seen to much better routing so the wires are less
likey
to go 'sproing' again.

When the yokes are changed, it will become *the* PTT switch.

By the way, the Plasti-Dip brand 'Liquid Electrical Tape' is sure nice for

sealing
things up and giving some reinforcing on the hard spots at the back of 
switches and
MOLEX pins. Makes a real neat job of it.

Greg

__________________________________________________
To unsubscribe from this list please send
mailto:[EMAIL PROTECTED]
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics

<<attachment: winmail.dat>>

Reply via email to