Randy, I use 3/4 inch aluminum angle at each side of the radio tray from the dash to a cross piece of the same material at the firewall. The side pieces are bolted to the cross piece which in turn is bolted to the firewall. Dan
-----Original Message----- From: Randy Tyler <[EMAIL PROTECTED]> To: coupers <[EMAIL PROTECTED]> Date: Monday, February 22, 1999 10:10 PM Subject: Fw: radio > > >---------- >> From: Randy Tyler <[EMAIL PROTECTED]> >> To: coupers <[EMAIL PROTECTED]> >> Subject: radio >> Date: Monday, February 22, 1999 8:01 PM >> >> I will be installing a radio and transponder at he bottom of instrument >> panel. Any ides on how to support the back end of the new radio gear. >> Also I have about 6hrs on major and can't seem to get oil pressure dialed >> in. At cruse 2400 rpm oil temp 180 oil psi is 27 lbs using 40wt oil. I >> adjust the oil bypass valve as much as I can with no luck. I have a new >> spring on the way from skyport I hope that will help out. >> >> >
<<attachment: winmail.dat>>
