HVAC units usually go on the roof which means at some point, ducts and pipes 
have to penetrate the roof. Water loves holes which means your waterproofing 
has been compromised. Water is very patient and can and will find leaks over 
time. 

And yes, residential eqpt typically handle the all day everyday loads. 

A lease should include clauses regarding capital improvements that are the LL's 
responsibility. Please check that. 

As for creative ideas, stack effect ventilation is great for hot areas. 
Basically create ventilation near the top of the space or building. Heat rises 
and will exhaust there. That air movement alone will draw up area below and 
create a draft. Moving air is always cooler and refreshing. Moisture will also 
vent out which means nicer, drier air. Etc etc. 


Jerome, from his iPhone =)

On May 11, 2011, at 7:30 AM, nickj <[email protected]> wrote:

> Hi Jerome,
> 
> Thanks for the reply - I'm curious, what do you mean regarding the
> possibility of damaging the waterproofing on the roof? How so?
> 
> My concern also is that residential equipment was not designed to run
> for 9 hours a day 5 days a week...
> 
> With regards to the landlord, there is no chance of them providing
> HVAC... We're having a hard enough time getting a new door! :)
> 
> Do you have any thoughts or creative ideas on how else to heat & cool?
> 
> Thanks, Nick
> 
> 
> 
> On May 12, 12:18 am, Jerome Chang <[email protected]> wrote:
>> Hi Nick.  I'm an architect.  To use residential grade equipment for 
>> commercial applications is a big red flag for me, especially with such 
>> critical, frequently used items such as HVAC.  Usually, the landlord 
>> provides the HVAC, and in fact would want to so you don't potentially damage 
>> the waterproofing on the roof.  At least that's the standard I've seen in 
>> the States.
>> 
>> Please consult a mechanical engineer no matter which kind of system you use. 
>>  I cannot stress this enough: SUPER SUPER IMPORTANT.
>> 
>> Jerome
>> ______________
>> BLANKSPACES
>> "work FOR yourself, not BY yourself"
>> 
>> www.blankspaces.com
>> 5405 Wilshire Blvd (2 blocks west of La Brea) Los Angeles, CA 90036
>> 1450 2nd Street (@ Broadway), Santa Monica, CA 90401
>> 
>> 323.330.9505 (office)
>> 
>> On May 10, 2011, at 9:28 PM, nickj wrote:
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>>> Hi all,
>> 
>>> We have been busily working on a 285sqm space in Melbourne, Australia.
>>> We have a very long term lease, and are doing the physical labour
>>> ourselves, while maintaining our other businesses during the day... So
>>> it's hectic, and obviously we're on a budget.
>> 
>>> Right now we're battling with heating and cooling the space
>>> efficiently. Commercial ducted units are in the realm of $20-30k
>>> (reverse cycle ducted air conditioning)... This is probably
>>> unrealistic right now.
>> 
>>> That said, I was curious if anyone had experience in this area. There
>>> is no insulation at present, with a trussed roof measuring 6m at the
>>> peak, and 3.6m at the sides. We are considering just buying 4 to 5
>>> residential split systems to heat and cool, which are around $700
>>> each. Other options may include natural gas heating with open bar /
>>> element heaters suspended from the beams.
>> 
>>> Has anyone tackled this before on a budget? Here are a few pics to get
>>> an idea of the space:http://blog.electronworkshop.com.au
>> 
>>> Thanks!
>> 
>>> --
>>> You received this message because you are subscribed to the Google Groups 
>>> "Coworking" group.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to 
>>> [email protected].
>>> For more options, visit this group 
>>> athttp://groups.google.com/group/coworking?hl=en.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Coworking" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to 
> [email protected].
> For more options, visit this group at 
> http://groups.google.com/group/coworking?hl=en.
> 

-- 
You received this message because you are subscribed to the Google Groups 
"Coworking" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/coworking?hl=en.

Reply via email to