This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SHLOMIF, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Feb 15 05:35:57 2008] Trying to get 'http://www.cpan.org/authors/id/S/SH/SHLOMIF/IO-Socket-INET6-2.52.tar.gz' [MSG] [Fri Feb 15 05:36:05 2008] Trying to get 'http://www.cpan.org/authors/id/S/SH/SHLOMIF/CHECKSUMS' [MSG] [Fri Feb 15 05:36:06 2008] Checksum matches for 'IO-Socket-INET6-2.52.tar.gz' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/t/' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/t/io_udp6.t' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/t/io_multihomed6.t' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/t/host6.t' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/t/io_sock6.t' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/META.yml' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/INET6.pm' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/MANIFEST' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/ChangeLog' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/Makefile.PL' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO-Socket-INET6-2.52/README' [MSG] [Fri Feb 15 05:36:07 2008] Extracted 'IO::Socket::INET6' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52' [MSG] [Fri Feb 15 05:36:09 2008] Checking if your kit is complete... Looks good Warning: prerequisite Socket6 0.12 not found. Writing Makefile for IO::Socket::INET6 [MSG] [Fri Feb 15 05:36:09 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Feb 15 05:36:09 2008] Module 'IO::Socket::INET6' requires 'Socket6' version '0.12' to be installed [MSG] [Fri Feb 15 05:36:09 2008] Trying to get 'http://www.cpan.org/authors/id/U/UM/UMEMOTO/Socket6-0.19.tar.gz' [MSG] [Fri Feb 15 05:36:11 2008] Trying to get 'http://www.cpan.org/authors/id/U/UM/UMEMOTO/CHECKSUMS' [MSG] [Fri Feb 15 05:36:11 2008] Checksum matches for 'Socket6-0.19.tar.gz' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/t' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/gai.h' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/getnameinfo.c' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/MANIFEST' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/config.h.in' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/configure.in' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/META.yml' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/Socket6.xs' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/im-140.diff' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/inet_pton.c' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/aclocal.m4' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/ChangeLog' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/inet_ntop.c' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/configure' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/gailookup.pl.in' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/ftpmirror-1.96.diff' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/config.pl.in' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/Socket6.pm' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/README' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/Makefile.PL' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/getaddrinfo.c' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6-0.19/t/use.t' [MSG] [Fri Feb 15 05:36:12 2008] Extracted 'Socket6' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19' [MSG] [Fri Feb 15 05:36:44 2008] checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking whether your Perl5 have PL_sv_undef... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for getaddrinfo... yes checking for getnameinfo... yes checking for gethostbyname2... yes checking for getipnodebyname... yes checking for getipnodebyaddr... yes checking for inet_pton... yes checking for inet_ntop... yes checking whether you have sa_len in struct sockaddr... yes checking whether you have sin6_scope_id in struct sockaddr_in6... yes checking for socklen_t... yes configure: creating ./config.status config.status: creating config.pl config.status: creating gailookup.pl config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for Socket6 [MSG] [Fri Feb 15 05:36:44 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Feb 15 05:37:02 2008] cp Socket6.pm blib/lib/Socket6.pm /Volumes/Media/smoke/perl562/bin/perl /Volumes/Media/smoke/perl562/lib/5.6.2/ExtUtils/xsubpp -noprototypes -typemap /Volumes/Media/smoke/perl562/lib/5.6.2/ExtUtils/typemap Socket6.xs > Socket6.xsc && mv Socket6.xsc Socket6.c gcc -c -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -O3 -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" "-I/Volumes/Media/smoke/perl562/lib/5.6.2/darwin-thread-multi-64int/CORE" Socket6.c Socket6.xs: In function 'XS_Socket6_getaddrinfo': Socket6.xs:668: warning: assignment discards qualifiers from pointer target type Socket6.xs: In function 'XS_Socket6_gai_strerror': Socket6.xs:724: warning: assignment discards qualifiers from pointer target type Running Mkbootstrap for Socket6 () chmod 644 Socket6.bs rm -f blib/arch/auto/Socket6/Socket6.bundle LD_RUN_PATH="" env MACOSX_DEPLOYMENT_TARGET=10.3 cc -bundle -undefined dynamic_lookup -L/usr/local/lib Socket6.o -o blib/arch/auto/Socket6/Socket6.bundle chmod 755 blib/arch/auto/Socket6/Socket6.bundle cp Socket6.bs blib/arch/auto/Socket6/Socket6.bs chmod 644 blib/arch/auto/Socket6/Socket6.bs [MSG] [Fri Feb 15 05:37:04 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/use......ok All tests successful. Files=1, Tests=3, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.12 cusr 0.04 csys = 0.23 CPU) Result: PASS [MSG] [Fri Feb 15 05:37:04 2008] Sending test report for 'Socket6-0.19' [MSG] [Fri Feb 15 05:37:05 2008] Successfully sent 'pass' report for 'Socket6-0.19' [MSG] [Fri Feb 15 05:37:09 2008] cp INET6.pm blib/lib/IO/Socket/INET6.pm Manifying blib/man3/IO::Socket::INET6.3 [ERROR] [Fri Feb 15 05:37:14 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/host6...............Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 54. Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 31. Compilation failed in require at t/host6.t line 33. BEGIN failed--compilation aborted at t/host6.t line 33. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/io_multihomed6......Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 54. Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 31. Compilation failed in require at t/io_multihomed6.t line 55. BEGIN failed--compilation aborted at t/io_multihomed6.t line 55. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/io_sock6............Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 54. Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 31. Compilation failed in require at t/io_sock6.t line 45. BEGIN failed--compilation aborted at t/io_sock6.t line 45. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/io_udp6.............Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 54. Bareword "AF_INET6" not allowed while "strict subs" in use at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm line 31. Compilation failed in require at t/io_udp6.t line 75. BEGIN failed--compilation aborted at t/io_udp6.t line 75. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Test Summary Report ------------------- t/host6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/io_multihomed6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/io_sock6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/io_udp6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=4, Tests=0, 3 wallclock secs ( 0.08 usr 0.06 sys + 0.94 cusr 0.28 csys = 1.36 CPU) Result: FAIL Failed 4/4 test programs. 0/0 subtests failed. make: *** [test_dynamic] Error 35 [MSG] [Fri Feb 15 05:37:14 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Socket6 0.19 0.12 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 3.07e-02. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib PERL5_CPANPLUS_IS_EXECUTING = PERL5_CPANPLUS_IS_RUNNING = 19893 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='-e' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
