This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JDHEDDEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Feb 18 18:22:59 2008] Trying to get 'http://www.cpan.org/authors/id/J/JD/JDHEDDEN/Thread-Semaphore-2.02.tar.gz' [MSG] [Mon Feb 18 18:23:01 2008] Trying to get 'http://www.cpan.org/authors/id/J/JD/JDHEDDEN/CHECKSUMS' [MSG] [Mon Feb 18 18:23:03 2008] Checksum matches for 'Thread-Semaphore-2.02.tar.gz' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/Changes' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/examples/' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/examples/semaphore.pl' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/lib/' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/lib/Thread/' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/lib/Thread/Semaphore.pm' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/Makefile.PL' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/MANIFEST' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/META.yml' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/README' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/t/' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/t/00_load.t' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/t/01_basic.t' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/t/02_errs.t' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread-Semaphore-2.02/t/99_pod.t' [MSG] [Mon Feb 18 18:23:03 2008] Extracted 'Thread::Semaphore' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Thread-Semaphore-2.02' [MSG] [Mon Feb 18 18:23:05 2008] Checking if your kit is complete... Looks good Writing Makefile for Thread::Semaphore [MSG] [Mon Feb 18 18:23:05 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Feb 18 18:23:07 2008] cp lib/Thread/Semaphore.pm blib/lib/Thread/Semaphore.pm Manifying blib/man3/Thread::Semaphore.3 [ERROR] [Mon Feb 18 18:23:09 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.......# Testing Thread::Semaphore 2.02 ok t/01_basic...... # Failed test 'Thread 1 done' # in t/01_basic.t at line 38. # got: '3' # expected: '5' # Failed test 'Main re-got semaphore' # in t/01_basic.t at line 62. # got: '3' # expected: '4' # Failed test 'Thread 2 got semaphore' # in t/01_basic.t at line 44. # got: '4' # expected: '3' # Looks like you failed 3 tests of 10. Dubious, test returned 3 (wstat 768, 0x300) Failed 3/10 subtests t/02_errs.......ok t/99_pod........skipped: Module maintainer tests Test Summary Report ------------------- t/01_basic.t (Wstat: 768 Tests: 10 Failed: 3) Failed tests: 6-8 Non-zero exit status: 3 Files=4, Tests=23, 1 wallclock secs ( 0.11 usr 0.10 sys + 0.43 cusr 0.24 csys = 0.88 CPU) Result: FAIL Failed 1/4 test programs. 3/23 subtests failed. *** Error code 29 make: Fatal error: Command failed for target `test_dynamic' [MSG] [Mon Feb 18 18:23:09 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Scalar::Util 1.18 1.1 Test::More 0.62 0.5 threads 1.07 0 threads::shared 0.94 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Thread-Semaphore-2.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Thread-Semaphore-2.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Thread-Semaphore-2.02/blib PERL5_CPANPLUS_IS_RUNNING = 7412 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='-e -Dprefix=/export/home/chris/perl588 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
