This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [EMAIL PROTECTED] to keep other
test volunteers informed and to prevent any duplicate effort.
--
This is an error report generated automatically by CPANPLUS,
version 0.048.
Below is the error stack during 'make test':
cd libPARI && /usr/bin/make LIB="" LIBPERL_A="libperl.a" LINKTYPE="dynamic"
PREFIX="" OPTIMIZE="-O3 -march=athlon-xp -mcpu=athlon-xp -fomit-frame-pointer
-pipe -ffast-math -funroll-loops -msse -m3dnow -mmmx -mfpmath=sse,387"
PASTHRU_DEFINE="" PASTHRU_INC=""
make[1]: Entering directory
`/home/.perlsmoke/gentoo/.cpanplus/5.8.4/build/Math-Pari-2.010600/libPARI'
make[1]: Leaving directory
`/home/.perlsmoke/gentoo/.cpanplus/5.8.4/build/Math-Pari-2.010600/libPARI'
make[1]: Entering directory
`/home/.perlsmoke/gentoo/.cpanplus/5.8.4/build/Math-Pari-2.010600/libPARI'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/home/.perlsmoke/gentoo/.cpanplus/5.8.4/build/Math-Pari-2.010600/libPARI'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/00_Pari.....ok
t/analyz......ok
t/elliptic....ok
t/graph.......# Can't locate Term/Gnuplot.pm in @INC, ignoring plotting
ok
1/28 skipped: plot() - can't test it yet
t/linear......ok
t/nfields.....PARI: *** Warning: insufficient precision for fundamental
units, not given.
PARI: *** Warning: not a fundamental discriminant in quadclassunit.
FAILED test 21
Failed 1/161 tests, 99.38% okay
t/number......ok
t/objets......ok
1/62 skipped: test producing error unsupported yet (impossible inverse
modulo: Mod(131, 49649).)
t/ploth.......# Can't locate Term/Gnuplot.pm in @INC, ignoring plotting
ok
10/34 skipped: various reasons
t/PlotRect....# Can't locate Term/Gnuplot.pm in @INC, ignoring the test
skipped
all skipped: Can't locate Term/Gnuplot.pm in @INC
t/polyser.....ok
t/program.....ok
13/37 skipped: various reasons
t/sumiter.....ok
t/trans.......ok
Failed 1/14 test scripts, 92.86% okay. 1/823 subtests failed, 99.88% okay.
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/nfields.t 161 1 0.62% 21
1 test and 25 subtests skipped.
make: *** [test_dynamic] Error 255
Additional comments:
Hello, Ilya Zakharevich! Thanks for uploading your works to CPAN.
I noticed that the test suite seem to fail without these modules:
Term::Gnuplot
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Ilya Zakharevich ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Term::Gnuplot' => '0', # or a minimum workable version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. Also, because many people perform automatic
tests on CPAN, chances are that you will receive identical messages
about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
--
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=linux, osvers=2.6.7-gentoo-r11, archname=i386-linux-thread-multi
uname='linux pasta 2.6.7-gentoo-r11 #2 thu jul 29 02:37:02 idt 2004 i686
amd athlon(tm) xp 2400+ authenticamd gnulinux '
config_args='-des -Darchname=i386-linux-thread -Dcccdlflags=-fPIC
-Dccdlflags=-rdynamic -Dcc=gcc -Dprefix=/usr -Dvendorprefix=/usr
-Dsiteprefix=/usr -Dlocincpth= -Doptimize=-O3 -march=athlon-xp -mcpu=athlon-xp
-fomit-frame-pointer -pipe -ffast-math -funroll-loops -msse -m3dnow -mmmx
-mfpmath=sse,387 -Duselargefiles -Dd_dosuid -Dd_semctl_semun
-Dscriptdir=/usr/bin -Dman3ext=3pm -Dcf_by=Gentoo -Ud_csh -Dusethreads -Di_gdbm
-Di_db -Di_ndbm'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O3 -march=athlon-xp -mcpu=athlon-xp -fomit-frame-pointer -pipe
-ffast-math -funroll-loops -msse -m3dnow -mmmx -mfpmath=sse,387',
cppflags='-DPERL5 -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing'
ccversion='', gccversion='3.3.3 20040412 (Gentoo Linux 3.3.3-r6,
ssp-3.3.2-2, pie-8.7.6)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lpthread -lnsl -lndbm -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.3.3.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
