This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- ******************************** NOTE ******************************** The comments below are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional information, and do not take it personally. (We appreciate your patience. :) ********************************************************************** Hello, David Wheeler! This is a computer-generated error report created automatically by CPANPLUS, version 0.050_04. Comments from the tester may appear at the end of this report, as well. Thanks for uploading your works to CPAN. However, it appears that CPANPLUS encountered problems while testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jan 1 18:54:12 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DW/DWHEELER/FSA-Rules-0.21.tar.gz' [MSG] [Sat Jan 1 18:54:18 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DW/DWHEELER/CHECKSUMS' [MSG] [Sat Jan 1 18:54:19 2005] Checksum matches for 'FSA-Rules-0.21.tar.gz' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/Build.PL' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/Changes' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/lib/' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/lib/FSA/' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/lib/FSA/Rules.pm' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/Makefile.PL' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/MANIFEST' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/META.yml' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/README' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/base.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/graph.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/pingpong.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/pod-coverage.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/pod.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA-Rules-0.21/t/state.t' [MSG] [Sat Jan 1 18:54:19 2005] Extracted 'FSA::Rules' to 'C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.4\build\FSA-Rules-0.21' [ERROR] [Sat Jan 1 18:54:31 2005] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe Build --makefile_env_macros 1 test t\base............ok t\graph...........dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 5-6, 10 Failed 3/10 tests, 70.00% okay t\pingpong........ok t\pod-coverage....ok t\pod.............ok t\state...........ok Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\graph.t 3 768 10 3 30.00% 5-6 10 Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. # Failed test (t\graph.t at line 55) # got: 'digraph test { # node [label="\N"]; # graph [bb="0,0,98,196"]; # ping [label=ping, pos="68,170", width="0.78", height="0.50"]; # end [label=end, pos="39,26", width="0.75", height="0.50"]; # pong [label=pong, pos="68,98", width="0.83", height="0.50"]; # ping -> end [decorate=1, pos="e,33,44 49,157 38,146 35,136 29,116 23,95 26,72 30,54"]; # ping -> pong [decorate=1, pos="e,62,116 62,152 61,144 61,135 61,126"]; # pong -> end [decorate=1, pos="e,46,44 61,80 57,72 53,62 50,54"]; # pong -> ping [decorate=1, pos="e,74,152 74,116 75,124 75,133 75,142"]; # } # ' # expected: 'digraph test { # node [label="\N"]; # graph [bb="0,0,92,180"]; # ping [label=ping, pos="65,162", width="0.75", height="0.50"]; # end [label=end, pos="37,18", width="0.75", height="0.50"]; # pong [label=pong, pos="65,90", width="0.75", height="0.50"]; # ping -> end [decorate=1, pos="e,32,36 47,149 37,137 34,127 29,108 24,87 26,64 30,46"]; # ping -> pong [decorate=1, pos="e,59,108 59,144 58,136 58,127 58,118"]; # pong -> end [decorate=1, pos="e,44,35 58,73 55,64 51,54 47,45"]; # pong -> ping [decorate=1, pos="e,71,144 71,108 72,116 72,125 72,134"]; # } # ' # Failed test (t\graph.t at line 59) # got: 'digraph test { # node [label="\N"]; # graph [bb="0,0,98,196"]; # ping [label=ping, pos="68,170", width="0.78", height="0.50"]; # end [label=end, pos="39,26", width="0.75", height="0.50"]; # pong [label=pong, pos="68,98", width="0.83", height="0.50"]; # ping -> end [decorate=1, pos="e,33,44 49,157 38,146 35,136 29,116 23,95 26,72 30,54"]; # ping -> pong [decorate=1, pos="e,62,116 62,152 61,144 61,135 61,126"]; # pong -> end [decorate=1, pos="e,46,44 61,80 57,72 53,62 50,54"]; # pong -> ping [decorate=1, pos="e,74,152 74,116 75,124 75,133 75,142"]; # } # ' # expected: 'digraph test { # node [label="\N"]; # graph [bb="0,0,92,180"]; # ping [label=ping, pos="65,162", width="0.75", height="0.50"]; # end [label=end, pos="37,18", width="0.75", height="0.50"]; # pong [label=pong, pos="65,90", width="0.75", height="0.50"]; # ping -> end [decorate=1, pos="e,32,36 47,149 37,137 34,127 29,108 24,87 26,64 30,46"]; # ping -> pong [decorate=1, pos="e,59,108 59,144 58,136 58,127 58,118"]; # pong -> end [decorate=1, pos="e,44,35 58,73 55,64 51,54 47,45"]; # pong -> ping [decorate=1, pos="e,71,144 71,108 72,116 72,125 72,134"]; # } # ' # Failed test (t\graph.t at line 109) # got: 'digraph test { # graph [bgcolor=magenta]; # node [label="\N", shape=circle]; # graph [bb="0,0,169,318"]; # ping [label=ping, pos="134,277", width="0.89", height="0.90"]; # end [label=end, pos="58,37", width="0.81", height="0.81"]; # pong [label=pong, pos="134,170", width="0.97", height="0.99"]; # ping -> end [decorate=1, label="Enough\nIterations\n(ping)", pos="e,44,63 104,266 78,255 43,236 27,206 5,163 23,108 39,72", lp="62,170"]; # ping -> pong [decorate=1, pos="e,128,205 128,245 127,235 127,225 127,215"]; # pong -> end [decorate=1, label="Enough\nIterations", pos="e,72,62 116,139 105,119 89,92 77,71", lp="134,100"]; # pong -> ping [decorate=1, pos="e,140,245 140,205 141,215 141,225 141,235"]; # } # ' # expected: 'digraph test { # graph [bgcolor=magenta]; # node [label="\N", shape=circle]; # graph [bb="0,0,150,278"]; # ping [label=ping, pos="119,249", width="0.81", height="0.81"]; # end [label=end, pos="54,26", width="0.69", height="0.71"]; # pong [label=pong, pos="119,151", width="0.86", height="0.86"]; # ping -> end [decorate=1, label="Enough\nIterations\n(ping)", pos="e,42,48 92,238 70,227 41,209 27,182 7,142 23,90 38,57", lp="57,151"]; # ping -> pong [decorate=1, pos="e,113,182 113,221 112,212 112,202 112,192"]; # pong -> end [decorate=1, label="Enough\nIterations", pos="e,66,49 105,123 95,104 81,78 71,58", lp="119,86"]; # pong -> ping [decorate=1, pos="e,125,221 125,182 126,191 126,201 126,211"]; # } # ' # Looks like you failed 3 tests of 10. Failed 1/6 test scripts, 83.33% okay. 3/395 subtests failed, 99.24% okay. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0xff' Stop. -- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=C:\PROGRA~1\MICROS~3\VC98\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
