This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear DESPAIR,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[CP_MSG] [Sun Nov 20 01:01:03 2005] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DE/DESPAIR/WebMoney-WMSigner-0.02.tar.gz'
[CP_MSG] [Sun Nov 20 01:01:31 2005] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DE/DESPAIR/CHECKSUMS'
[CP_MSG] [Sun Nov 20 01:01:41 2005] No 'md5' checksum known for 
'WebMoney-WMSigner-0.02.tar.gz'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/WMSigner.xs'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/rsalib1.cpp'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/Changes'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/signer.h'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/crypto.h'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/MANIFEST'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/cmdbase.h'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/md4.cpp'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/md4.h'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/META.yml'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/test.pl'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/WMSigner.pm'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/rsalib1.h'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/signer.cpp'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/crypto.cpp'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/cmdbase.cpp'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 
'WebMoney-WMSigner-0.02/Makefile.PL'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney-WMSigner-0.02/README'
[CP_MSG] [Sun Nov 20 01:01:42 2005] Extracted 'WebMoney::WMSigner' to 
'/home/njh/.cpanplus/5.8.7/build/WebMoney-WMSigner-0.02'
[CP_MSG] [Sun Nov 20 01:01:43 2005] Checking if your kit is complete...
Looks good
Writing Makefile for WebMoney::WMSigner

[CP_ERROR] [Sun Nov 20 01:01:46 2005] MAKE failed: No such file or directory cp 
WMSigner.pm blib/lib/WebMoney/WMSigner.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp  -C++ -typemap 
/usr/share/perl/5.8/ExtUtils/typemap  WMSigner.xs > WMSigner.xsc && mv 
WMSigner.xsc WMSigner.c
Please specify prototyping behavior for WMSigner.xs (see perlxs manual)
g++ -c   -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN 
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC 
"-I/usr/lib/perl/5.8/CORE"   WMSigner.c
/bin/sh: g++: command not found
make: *** [WMSigner.o] Error 127



******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=linux, osvers=2.6.14-rc4, archname=i486-linux-gnu-thread-multi
    uname='linux ninsei 2.6.14-rc4 #1 smp preempt tue oct 11 20:35:48 pdt 2005 
i686 gnulinux '
    config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN 
-Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr 
-Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr 
-Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 
-Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.7 
-Dsitearch=/usr/local/lib/perl/5.8.7 -Dman1dir=/usr/share/man/man1 
-Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 
-Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl 
-Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib 
-Dlibperl=libperl.so.5.8.7 -Dd_dosuid -des'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN 
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN 
-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.2 (Debian 4.0.2-2)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
    perllibs=-ldl -lm -lpthread -lc -lcrypt
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so.5.8.7
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'

Reply via email to