This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Andy Lester, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [CP_MSG] [Fri Mar 17 19:27:40 2006] Checking if source files are up to date [CP_MSG] [Fri Mar 17 19:27:40 2006] Retrieving /root/.cpanplus/sourcefiles.2.13.stored [CP_MSG] [Fri Mar 17 19:27:43 2006] Module 'Test::WWW::Mechanize::Catalyst' requires 'Test::WWW::Mechanize' version '1.04' to be installed [CP_MSG] [Fri Mar 17 19:27:43 2006] make[1]: Entering directory `/root/.cpanplus/5.8.6/build/Test-WWW-Mechanize-1.08' make[1]: Leaving directory `/root/.cpanplus/5.8.6/build/Test-WWW-Mechanize-1.08' [CP_ERROR] [Fri Mar 17 19:27:55 2006] MAKE TEST failed: make[1]: Entering directory `/root/.cpanplus/5.8.6/build/Test-WWW-Mechanize-1.08' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00load................# Testing Test::WWW::Mechanize 1.08, Perl 5.008006, /usr/bin/perl ok t/content_contains......ok t/content_lacks.........ok t/follow_link_ok........ok t/get_ok-parms..........ok t/get_ok................ # Failed test 'Fails to get nonexistent URI and reports failure' # in t/get_ok.t at line 48. # STDERR is: # # Failed test 'Try to get bad URL' # # in t/get_ok.t at line 47. # # 403 # # Forbidden # # not: # (?-xism:#\s+Failed\ test.*?\n?.*?t\/get_ok\.t at line 47.*\n?) # # 500 # # # Can't connect to wango.nonexistent.xx-only-testing:80 (Bad hostname 'wango.nonexistent.xx-only-testing') # # as expected FAILED test 9 Failed 1/11 tests, 90.91% okay t/has_tag...............ok t/link_content..........ok t/link_status...........ok t/links_ok..............ok t/new...................ok t/page_links_content....ok t/page_links_ok.........ok t/pod-coverage..........ok t/pod...................ok t/stuff_inputs..........ok Failed 1/16 test scripts, 93.75% okay. 1/102 subtests failed, 99.02% okay. Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/get_ok.t 11 1 9.09% 9 make[1]: *** [test_dynamic] Error 255 make[1]: Leaving directory `/root/.cpanplus/5.8.6/build/Test-WWW-Mechanize-1.08' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Carp::Assert::More 1.12 HTTP::Server::Simple 0.16 Test::LongString 0.09 Test::More 0.62 URI::file 4.19 WWW::Mechanize 1.16 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi uname='linux hs20-bc1-5.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -Dversion=5.8.6 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_endprotoent_r_proto -Ud_endservent_r_proto -Ud_sethostent_r_proto -Ud_setprotoent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.5 5.8.4 5.8.3' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables', cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='4.0.2 20051125 (Red Hat 4.0.2-8)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
